[Asterisk-Users] SJphone on PDA registering with Asterisk???

[Ronald Wiplinger]

James Pooton wrote:

>I'm all so using SJphone on my x50v, works surprisingly well :). 
>
>Is voip.elmit.com also in the 192.168.1.X NAT space that your PDA is in?
>
>  
>
There might be the problem:

I have the server at two ethernet cards reachable:
Extern with a public IP
Intern with 192.168.250.20
on this internal LAN is a wireless accesspoint, which in return changes 
the IP address to a network 192.168.1.x
There is a NAT between the internal server IP and the PDA, and there is 
a nat between internal IP and Internet.

>Do you have "host=dynamic" in your * sip.conf entry for 701 ? Actually might
>help to toss your sip.conf entry out here for 701 without the secret.
>
>  
>

[701]   ; Test phone 701
type=friend
username=701
secret=very_secret
nat=yes
host=dynamic
context=test_phone           
canreinvite=yes
disallow=all
allow=ulaw
allow=alaw
dtmfmode=rfc2833
qualify=1000
mailbox=701 at other
pickupgroup=1
qualify=yes



>Do you see any connection attempts on the console? (ie starting * with
>-gcvvvvvv)
>
>  
>
No, not at all!!


bye

Ronald

>Your not far off..
>
>-James
>
>
>
>-----Original Message-----
>From: asterisk-users-bounces at lists.digium.com
>[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Ronald
>Wiplinger
>Sent: Sunday, March 06, 2005 8:56 AM
>To: Asterisk Users Mailing List - Non-Commercial Discussion
>Subject: Re: [Asterisk-Users] SJphone on PDA registering with Asterisk???
>
>C. Tomlinson wrote:
>
>  
>
>>Ronald,
>>
>>You will need to give *more* information than that....
>>
>>I have SJphone on my PDA, and have setup a SIP account on *, and it works
>>fine :-)
>>
>>I take it you have setup sjphone to register to *.
>>I take it your PDA has a network connection?
>> 
>>
>>    
>>
>
>I have setup a sip account at asterisk (701:password)
>I have an asterisk (voip.elmit.com with an IP address)
>
>I have setup a new profile on the PDA sip-elmit:
>
>Initialization:
>as suggested
>
>
>Sip proxy:
>Proxy domain:  <my IP address> Port 5060
>Userdamain: <voip.elmit.com
>
>Advanced options
>(nothing set)
>
>
>Sip:
>Expose software version
>Enable STUN unsage
>
>
>Redirection:
>nothing selected
>
>
>STUN:
>as suggested
>
>
>Use elimit-sip
>"elmit-sip       in use"
>
>(save changes)
>
>
>Display shows:
>elmit-sip
>SIP: registering as
>sip:701 at voip.elmit.com ...
>Host address: 192.168.1.101
>NAT/Firewall: Full Cone NAT
>
>------------------
>Ronald (office) (Ro)
>sip:601 at voip.elmit.com
>
>click on dial
>
>Nothing happens, .. not registered in *, ...
>
>What have I done wrong?
>
>
>bye
>
>Ronald
>  
>


-- 
Ronald Wiplinger  (CEO of ELMIT)
http://www.elmit.com    +886 (0) 939--77-55-16  or FWD 511208
- I'm a SpamCon Foundation Member, #694, Verify it at http://www.spamcon.org

PS: Spam prevention!
Our system is protected with a spam prevention program. 
If you send us an e-mail, our system will send you a confirmation message back. Just reply to this confirmation message please. 
After receiving this confirmation message, our system will send the hold message (one) and all future messages (after the received confirmation message) to me without asking you again.