[Asterisk-Users] TE110P module woes

[Scott Stingel]

Just to confirm that you also powered down and up?

I've no experience with the TE110, but this is a known problem with the 
TE405 and TE410.   They apparently can get locked up, and only a power 
cycle will clear it.

Regards
Scott Stingel

www.evtmedia.com


Alfredo Sola wrote:

>
>     Hi,
>
>     I have been using asterisk for a couple of months now and for thee 
> most part, I love it.
>
>     However, I'm having a problem with the drivers of the Digium 
> TE110P. I have tried both the Debian package and the CVS. I have tried 
> several kernels, and am now at 2.6.11.
>
>     This has been working before (with 2.6.8.1), but after a reboot it 
> stopped working and I am not able to consistently make it work or fail.
>
>     I have make clean, make and make install, no complains from make.
>
>     The zaptel module loads fine and says so:
>
> Zapata Telephony Interface Registered on major 196
>
>     But the module for the TE110P fails. If I only modprobe it, it 
> loads silently; but the moment I execute ztcfg, I get:
> ZT_SPANCONFIG failed on span 1: No such device or address (6)
>
>     If I ask for more verbose errors, I get:
>
>
> Zaptel Configuration
> ======================
>
> SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
>
> Channel map:
>
> Channel 01: Individual Clear channel (Default) (Slaves: 01)
> Channel 02: Individual Clear channel (Default) (Slaves: 02)
> Channel 03: Individual Clear channel (Default) (Slaves: 03)
> Channel 04: Individual Clear channel (Default) (Slaves: 04)
> Channel 05: Individual Clear channel (Default) (Slaves: 05)
> Channel 06: Individual Clear channel (Default) (Slaves: 06)
> Channel 07: Individual Clear channel (Default) (Slaves: 07)
> Channel 08: Individual Clear channel (Default) (Slaves: 08)
> Channel 09: Individual Clear channel (Default) (Slaves: 09)
> Channel 10: Individual Clear channel (Default) (Slaves: 10)
> Channel 11: Individual Clear channel (Default) (Slaves: 11)
> Channel 12: Individual Clear channel (Default) (Slaves: 12)
> Channel 13: Individual Clear channel (Default) (Slaves: 13)
> Channel 14: Individual Clear channel (Default) (Slaves: 14)
> Channel 15: Individual Clear channel (Default) (Slaves: 15)
> Channel 16: D-channel (Default) (Slaves: 16)
> Channel 17: Individual Clear channel (Default) (Slaves: 17)
> Channel 18: Individual Clear channel (Default) (Slaves: 18)
> Channel 19: Individual Clear channel (Default) (Slaves: 19)
> Channel 20: Individual Clear channel (Default) (Slaves: 20)
> Channel 21: Individual Clear channel (Default) (Slaves: 21)
> Channel 22: Individual Clear channel (Default) (Slaves: 22)
> Channel 23: Individual Clear channel (Default) (Slaves: 23)
> Channel 24: Individual Clear channel (Default) (Slaves: 24)
> Channel 25: Individual Clear channel (Default) (Slaves: 25)
> Channel 26: Individual Clear channel (Default) (Slaves: 26)
> Channel 27: Individual Clear channel (Default) (Slaves: 27)
> Channel 28: Individual Clear channel (Default) (Slaves: 28)
> Channel 29: Individual Clear channel (Default) (Slaves: 29)
> Channel 30: Individual Clear channel (Default) (Slaves: 30)
> Channel 31: Individual Clear channel (Default) (Slaves: 31)
>
> 31 channels configured.
>
> ZT_SPANCONFIG failed on span 1: No such device or address (6)
>
>     Any ideas?
>