[Asterisk-Users] CallerID in Australia & Analogue PSTN PhoneSystem

[Rod Bacon]

Some more info, I now have it attempting ID at least.

vpb/1-1: New call for context [local_pstn]
       > Using VPB Caller ID
       > CID record - start
    -- Executing SetMusicOnHold("vpb/1-1", "default") in new stack
    -- Executing Dial("vpb/1-1", "sip/1232|20|tTwW") in new stack
    -- Called 1232
    -- SIP/1232-1d9e is ringing
       > vpb/1-1: vpb_indicate [3] state[4]
       > CID record - skipped 301.582102ms trailing ring
       > CID record - recorded 1999.960070ms between rings
Mar  3 08:17:46 ERROR[8417]: chan_vpb.c:603 void get_callerid(vpb_pvt*): CID 
record - Failed to decode caller id on vpb/1-1 - INVALID_ERROR_CODE
       > Collected caller ID already

Is there something I need to do to give the system time to collect the VPB 
CID before calling the SIP phone?


----- Original Message ----- 
From: "James Andrewartha" <jamesa at daa.com.au>
Sent: Tuesday, January 04, 2005 11:50 PM
Subject: [Asterisk-Users] CallerID in Australia & Analogue PSTN PhoneSystem


> Howard Lowndes wrote:
>> Is there anyone using * in AU that has successfully extracted the CLID
>> from an incoming analogue PSTN phone call, and would like to spread the
>> word?
>
> Yes, I have. I'm using a Voicetronix OpenLine4 card. I did have an issue
> with the config file, you have to set callerid=yes before each channel,
> unless you're running CVS from 2004/12/13 21:04:12 or later. What hardware
> are you using? chan_vpb has useful debugging info for callerid at debug 
> level 4.
>
> James Andrewartha
> DAA Sysadmin
>