[Asterisk-Users] CallerID in Australia & Analogue PSTN PhoneSystem

[Rod Bacon]

I have the openline card with a recent CVS and I can't seem to get CallerID 
to work.

Debugging shows;

vpb/1-1: New call for context [local_pstn]
 > Caller ID disabled

vpb.conf is...

[general]
type = v4pci
cards = 1

[interfaces]
echocancel = on
board = 1
txhwgain => 12
txgain => 12
context = local_pstn
mode = fxo
group=1
callerid = on
channel = 1
channel = 2
channel = 3
channel = 4

Any ideas?


----- Original Message ----- 
From: "James Andrewartha" <jamesa at daa.com.au>
Sent: Tuesday, January 04, 2005 11:50 PM
Subject: [Asterisk-Users] CallerID in Australia & Analogue PSTN PhoneSystem


> Howard Lowndes wrote:
>> Is there anyone using * in AU that has successfully extracted the CLID
>> from an incoming analogue PSTN phone call, and would like to spread the
>> word?
>
> Yes, I have. I'm using a Voicetronix OpenLine4 card. I did have an issue
> with the config file, you have to set callerid=yes before each channel,
> unless you're running CVS from 2004/12/13 21:04:12 or later. What hardware
> are you using? chan_vpb has useful debugging info for callerid at debug 
> level 4.
>
> James Andrewartha
> DAA Sysadmin
>