[Asterisk-Users] mini atx and asterisk (EPIA and the like)

[Razza]

The dual riser and fritz cards are unrelated. My production system is a
C3 Samuel 5000, my development system is an M-1GHz Nemiah with the dual
riser card. The dual riser problem is down to the dual riser and am
dealing with Tranquil PC on it - although never tried it in the Samuel
so thanks for the info.

The Fritz problem is actually me not knowing enough about Linux to get
the blasted thing working! 

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Leo Ann
Boon
Sent: 01 March 2005 22:07
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] mini atx and asterisk (EPIA and the like)



See my comments inline
Razza wrote:

>I run mandrake 9.2, one FXO (x100p clone), 5 sip phones, MusicOnHold, 
>voicemail, etc. off my EPIA Classic/5000 with 512MB memory (I know 512 
>is totally OTT but had a spare SD stick lying around after upgrading my

>main PC) and it works fine.
>
>I would like to also run a Fritz ISDN card but am unable to get this 
>working in linux, also struggling with the dual active riser card (from

>Tranquil PC). Top PCI slot fails to do anything and bottom PCI slot is 
>great - so avoid multiple cards until tranquil give some useful advice!
>  
>
The motherboard must support 2 slot PCI for it to work. IIRC, the 
Ezra-500/800 can't support 2 slots. The later M10000 Nehemiah boards can

support 2 slots. Fritz ISDN works beautifully with M10000. My setup was 
Trustix 2.l + Fritz CAPI drivers + chan_capi.

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users