[Asterisk-Users] Asterisk failover solution

[John Cianfarani]

Then you need to cluster your DB servers so they aren't a point of
failure.

Thanks
John
-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Vamsi
Pottangi
Sent: Thursday, June 30, 2005 11:01 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Asterisk failover solution

Use Realtime and host the database on a separate machine.
This should solve most of your problems.

~Vamsi

On 6/30/05, Mohamed A. Gombolaty <mgombolaty at noorgroup.net> wrote:
>  Dear All, 
> 
>  I am using Linux-High Availability between two Asterisk servers,
everything
> is fine but I do have one problem with this, When a server fails and
the
> other  assumes the ip address and start asterisk on server 2, the ip
phone
> must re-register themselves again, otherwise the phones are dead. 
> 
>  Does anyone have Ideas of how to overcome this. 
>   -- 
> Thx
> MAG
>    
> 
> 
> 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   
> http://lists.digium.com/mailman/listinfo/asterisk-users
> 
>
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users