[Asterisk-Users] Asterisk failover solution

[Michael Stahl]

If your phones are setup to connect to the asterisk box by name, then a
smart DNS server can just point phones to the backup box after failure.
However, since asterisk running on the backup box doesn't know about the
phones, this is only half the solution

________________________________

From: Mohamed A. Gombolaty [mailto:mgombolaty at noorgroup.net] 
Sent: Thursday, June 30, 2005 8:30 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [Asterisk-Users] Asterisk failover solution


Dear All, 

 I am using Linux-High Availability between two Asterisk servers,
everything is fine but I do have one problem with this, When a server
fails and the other  assumes the ip address and start asterisk on server
2, the ip phone must re-register themselves again, otherwise the phones
are dead. 

 Does anyone have Ideas of how to overcome this. 
  
-- 
Thx
MAG
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050630/feda4dbe/attachment.htm