[Asterisk-Users] X100P connected as extension to Panasonic 616EASA-PHONE

[Terry H. Gilsenan]

> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com 
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of 
> Guillermo Salas M
> Sent: Thursday, 30 June 2005 1:55 PM
> To: asterisk-users at lists.digium.com
> Subject: [Asterisk-Users] X100P connected as extension to 
> Panasonic 616EASA-PHONE
> 
> Hi all.
> 
> I`ve installed a X100P on my box and is working well with 
> incoming and outgoing calls as a trunk with one PTSN line.
> 
> I want to connect the X100P to my Panasonic 616 EASA-PHONE as 
> an internal extension to permit to users to make calls to SIP 
> devices from analog phones, the problem is when I dial the 
> ext number where the X100P is connected I get busy tone.
> 
> What config I need to change to my asterisk files to permit 
> the commented in the last paragraph?

Can you actually do that? Is the X100P a dual mode card? Can it be both FXO
and FXS?

> 
> Best Regards,
> 
> 
> 
> Guillermo.
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users