[Asterisk-Users] CAPI and Caller ID name not showing.

[Stefan Gofferje]

On 15:54:12 June 29, 2005 Armin Schindler <armin at melware.de> wrote:
> On Wed, 29 Jun 2005, louis g wrote:
> >  I have an Asterisk server connected to ISDN2 lines off a PBX
> >  (Avaya) using 4 port Eicon Diva card. All works fine, but i'd like
> >  calls from the PBX to Asterisk to show the Caller ID name and not
> >  just the number. I know this information is being presented by
> >  looking through the ISDN trace for the Eicon Card. Asterisk trace
> >  show dialparties.agi: Caller ID name is '605' number is '605'. Can
> >  anyone point me in the right direction to get this sorted?. It's
> works with X100P cards :)
>
> What 'name' do you mean? Is it a subaddress?
> Please paste an example for that Eicon card trace where you see that
> name.

His PBX probably transmits the name per UUS1. zaphfc supports this also. I
have a zaphfc card as internal ISDN and connected a Siemens ISDN DECT phone
to it. Now, on incoming calls, the Siemens shows the CallerIDName as set by
Asterisk in the display. zaphfc also supports SendText...

Regards,
Stefan

-- 
  (o_   Stefan Gofferje          | Linux Systems Specialist
  //\   Reg'd Linux User #247167 | Network Security Specialist
  V_/_  Heckler & Koch - the original point and click interface