[Asterisk-Users] Junghanns 4 port BRI problem

[Kristof Hardy]

Doug Reid - Stormcorp wrote:
> I have a Junghanns BRI 4 port installed where only the first channel
> of each line is working i.e. channels 1 and 4 work but 2 and 5 don't.
> Our config is the same on this box as 15 other similar installations
> where all works well. the only error I see is in /var/log/messages:

Not sure if it's related, but I had the same error once when I used a 
wrong parameter in zapata.conf. For signalling I had something 
incorrect, but after i changed it to the following, it was okay:

signalling = bri_cpe


Cheers