[Asterisk-Users] AVM CAPI INSTALLATION

[sylvain garcia]

Armin Schindler a écrit :

>On Tue, 28 Jun 2005, sylvain garcia wrote:
>  
>
>>I use AVM fritz card A1, I have install with instruction of
>>Voip-info.or, but it don' work.
>>    
>>
>
>Which version of Asterisk and chan_capi do you use?
>How does your capi.conf look like?
>
>Armin
> 
>  
>
>>capiinfo
>>
>>Number of Controllers : 1
>>Controller 1:
>>Manufacturer: AVM GmbH
>>CAPI Version: 2.0
>>Manufacturer Version: 3.101-02  (49.18)
>>Serial Number: 1000001
>>BChannels: 2
>>Global Options: 0x00000039
>>   internal controller supported
>>   DTMF supported
>>   Supplementary Services supported
>>   channel allocation supported (leased lines)
>>B1 protocols support: 0x4000011f
>>   64 kbit/s with HDLC framing
>>   64 kbit/s bit-transparent operation
>>   V.110 asynconous operation with start/stop byte framing
>>   V.110 synconous operation with HDLC framing
>>   T.30 modem for fax group 3
>>   Modem asyncronous operation with start/stop byte framing
>>B2 protocols support: 0x00000b1b
>>   ISO 7776 (X.75 SLP)
>>   Transparent
>>   LAPD with Q.921 for D channel X.25 (SAPI 16)
>>   T.30 for fax group 3
>>   ISO 7776 (X.75 SLP) with V.42bis compression
>>   V.120 asyncronous mode
>>   V.120 bit-transparent mode
>>B3 protocols support: 0x800000bf
>>   Transparent
>>   T.90NL, T.70NL, T.90
>>   ISO 8208 (X.25 DTE-DTE)
>>   X.25 DCE
>>   T.30 for fax group 3
>>   T.30 for fax group 3 with extensions
>>   Modem
>>
>>  0100
>>  0200
>>  39000000
>>  1f010040
>>  1b0b0000
>>  bf000080
>>  00000000 00000000 00000000 00000000 00000000 00000000
>>  01000001 00020000 00000000 00000000 00000000
>>
>>Supplementary services support: 0x000003ff
>>   Hold / Retrieve
>>   Terminal Portability
>>   ECT
>>   3PTY
>>   Call Forwarding
>>   Call Deflection
>>   MCID
>>   CCBS
>>
>>But if I call to asterisk even if asterisk isn't start, it's busy,I dont
>>unsderstand Help me
>>
>>_______________________________________________
>>Asterisk-Users mailing list
>>Asterisk-Users at lists.digium.com
>>http://lists.digium.com/mailman/listinfo/asterisk-users
>>To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>    
>>
I use Asterisk 1.0.7 on Dedian Sarge with chan_capi  0.3.5.11

I don't configuure my capi.conf it is like orig;


; CAPI config
;
;
[general]
nationalprefix=0
internationalprefix=00
rxgain=0.8
txgain=0.8

[interfaces]

; msn=50
; incomingmsn=*
;controller=1
softdtmf=1
accountcode=
context=incomingtest
;echosquelch=1
;echocancel=yes
;echotail=64
;callgroup=1
;deflect=12345678
;devices=2


;PointToPoint (55512-0)
;for outgoing calls use example 5551212
;and in dialplan you can use callerid like
;exten => _0XXX.,1,StripMSD,1
;exten => _XXX.,2,Dial,CAPI/55512${CALLERIDNUM}:bBYEXTENSION
;============================================================
;mode=immediate
;isdnmode=ptp
inal:


my configuration of my dial plan of my internal LAN is correct and works
fine, so I would like test my connection capi in order to receive
incomingcall first and outgoing call in  second.

What is the modification to extensions.conf and capi.conf.

Thanks you for your help

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050628/3d7d67ea/attachment.htm