[Asterisk-Users] cheap HFC card on Bristuff vs cheap HFC card oni4l vs Fritz ISDN BRI card on CAPI

[David Masure]

Hi,

Bristuff works great with HFC card...  your compilation problem may come
from your kernel configuration...

You should check this doc, at least, for the redhat config :
http://www.automated.it/guidetoasterisk.htm

Then, installation of Bristuff works like as charm !

Bye

David Masure


-----Message d'origine-----
De : vdasilva [mailto:aquamoon at wol.co.za]
Envoyé : mardi 28 juin 2005 09:01
À : 'Asterisk Users Mailing List - Non-Commercial Discussion'
Objet : [Asterisk-Users] cheap HFC card on Bristuff vs cheap HFC card
oni4l vs Fritz ISDN BRI card on CAPI


Hello

I have asterisk running in Red Hat 9 with a cheap HFC card on i4l. I
have
choppy sound problems sometimes, and echo problems often. I am using a 2
port Grandstream ATA, Grandstream BT and a Grandstream GPX-2000

I read that changing to BriStuff will fix the echo problems, but have
also
read other users say that the only way they solved the echo/choppy sound
problems was using a Fritz ISDN card with the CAPI drivers...

I have tried using bristuff on RH9 but couldn't get my zaptel to
compile...
 
Then there is the issue of timing, ztdummy or zaprtc....and QoS setup on
the
Linux box...

Can anyone who has a 100% working Asterisk implementation using any of
the
techniques described above tell me more...

I will happily upgrade to the Fritz card if it will solve all the
problems...

Thanks
Vicente


-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Stefan
Gofferje
Sent: 07 April 2005 09:27 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] "Choppy" sounds after transferring to ISDN
clientor after a time

Hi,

Michiel van Baak schrieb:

>I had the exact same thing when using a cheap HFC-S card
>connected to my outside ISDN line. Replacing the card with
>an AVM Fritz!PCI fixed this issue for me.
>I tried a lot with the HFC-S card, different archs, SMP,
>uniprocessor, nolapic, noapic, dual channel ram setup, 1
>dimm only, removed all cards but the HFC-S, 4 different
>versions of bristuffed. Nothing solved it.
>
What do you mean? The choppy sound or the log message? Trouble is, my 
HFC-S is internal ISDN. I can't use a Fritz!PCI for that because it 
isn't capable of NT mode...

Regards,
Stefan

-- 
 (o_   Stefan Gofferje          | Linux Systems Specialist
 //\   Reg'd Linux User #247167 | Network Security Specialist
 V_/_  Linux is like a Wigwam - No gates, no windows, Apache inside

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users


_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users