[Asterisk-Users] Monitoring Sirrix quad BRI channels

[David Wilson]

Ah thanks Nicolás.

I will give it a try and let you know how it goes.


Kindest regards
David Wilson
_______________________________
D c D a t a
Tel +27 33 342 7003
Fax +27 33 345 4155
Cell +27 82 4147413
http://www.dcdata.co.za
support at dcdata.co.za
Powered by Linux, driven by passion !
_______________________________

"Computers are not intelligent. They only think they are."

----- Original Message ----- 
From: "Nicolás Gudiño" <asternic at gmail.com>
To: "David Wilson" <dave at dcdata.co.za>
Sent: Monday, June 27, 2005 4:14 PM
Subject: Re: [Asterisk-Users] Monitoring Sirrix quad BRI channels


Hello,

> Sounds interesting ! Any ideas on how to do that ? :)
>

>From your messages I don't know what are the actual channel names
being used. Are they Zap/08XXXX? In that case, you can write something
like this in op_buttons.cfg

[_ZAP/.*]
Position=1-8
Label='Sirrix"
Icon=2
etc, etc


> >
> > The "Flash Operator Panel" requires that we set a static value for each
> > line
> > or channel. With analogue cards its easy as the lines are Zap/1, Zap/2,
> > Zap/3 etc. With the Sirrix board the value seems to change: 0814f1f8,
> > 08129f38, 0837ad40.
> >
> > Is there anyway I can get this right so that each channel (8 of them) 
> > can
> > be
> > monitored ?
>
> You can try by using regexp to match the channel name, prefix it with
> an underscore and then a perl regexp pattern. Regards,
>

-- 
Nicolás Gudiño
Buenos Aires - Argentina