[Asterisk-Users] bristuff-0.2.0-RC8h does not compile

[Klaus-Peter Junghanns]

Hi,

it helps to have configured and working kernel sources installed.
Configure your kernel sources for the running kernel and then run
"make" in the kernel source dir to build the necessary scripts.
You dont have to wait until the kernel is compiled.

best regards

Klaus
--
Klaus-Peter Junghanns

Am Samstag, den 25.06.2005, 02:45 +0200 schrieb Stefan Gofferje:
> Hi folks,
> 
> I just tried to compile the latest bristuffed asterisk on a SuSE 9.2 
> Pro  but the compilation stopped with errors. Anyone any comments on that?
> 
> rm -f qozap.o *.ko *.mod.c *.mod.o .*o.cmd *~
> rm -rf .tmp_versions
> make -C /usr/src/linux-2.6 SUBDIRS=/usr/src/bristuff-0.2.0-RC8h/qozap 
> ZAP=-I/usr/src/bristuff-0.2.0-RC8h/zaptel-1.0.8 modules
> make[1]: Entering directory `/usr/src/linux-2.6.8-24.14'
> make[1]: *** No rule to make target `modules'.  Stop.
> make[1]: Leaving directory `/usr/src/linux-2.6.8-24.14'
> make: *** [linux26] Error 2
> install -D -m 644 qozap.ko /lib/modules/`uname -r`/misc/qozap.ko
> install: cannot stat `qozap.ko': No such file or directory
> make: *** [installlinux26] Error 1
> ****************************************************
> quadBRI driver installed.
> Press <Enter> to continue, or <CTRL> + <C> to abort.
> ****************************************************
> 
> rm -f cwain.o *.ko *.mod.c *.mod.o .*o.cmd *~
> make -C /usr/src/linux-2.6 SUBDIRS=/usr/src/bristuff-0.2.0-RC8h/cwain 
> ZAP=-I/usr/src/bristuff-0.2.0-RC8h/zaptel-1.0.8 modules
> make[1]: Entering directory `/usr/src/linux-2.6.8-24.14'
> make[1]: *** No rule to make target `modules'.  Stop.
> make[1]: Leaving directory `/usr/src/linux-2.6.8-24.14'
> make: *** [linux26] Error 2
> install -D -m 644 cwain.ko /lib/modules/`uname -r`/misc/cwain.ko
> install: cannot stat `cwain.ko': No such file or directory
> make: *** [installlinux26] Error 1
> ****************************************************
> cwain driver installed.
> Press <Enter> to continue, or <CTRL> + <C> to abort.
> ****************************************************
> 
> rm -f zaphfc.o *.ko *.mod.c *.mod.o .*o.cmd *~
> rm -rf .tmp_versions
> make -C /usr/src/linux-2.6 SUBDIRS=/usr/src/bristuff-0.2.0-RC8h/zaphfc 
> ZAP=-I/usr/src/bristuff-0.2.0-RC8h/zaptel-1.0.8 modules
> make[1]: Entering directory `/usr/src/linux-2.6.8-24.14'
> make[1]: *** No rule to make target `modules'.  Stop.
> make[1]: Leaving directory `/usr/src/linux-2.6.8-24.14'
> make: *** [linux26] Error 2
> install -D -m 644 zaphfc.ko /lib/modules/`uname -r`/misc/zaphfc.ko
> install: cannot stat `zaphfc.ko': No such file or directory
> make: *** [installlinux26] Error 1
> ****************************************************
> hfc-pci driver installed.
> Press <Enter> to continue, or <CTRL> + <C> to abort.
> ****************************************************
> 
> Regards,
> Stefan
>