[Asterisk-Users] QuadBRI: How to set the outgoing callerid (KPN - NL)

[Stijn Jonker]

Hello all,

Recently I purchased an QuadBRI card from junghanns.net after some
playing around, reconfiguring dialplans etc with the exception of 1
thing everything seems to work:

I seem to be unable to set the outbound callerid. The dutch telecom
operator (KPN) provided me with 4 MSN's on 1 BRI interface. In the past
years I'm more then used to setting the MSN without the leading 0, this
always worked fine.

With the QuadBRI this didn't work, added the 0, messed around with
CallingPres, SetCallerPres and the various callerid and usecallerpres
values in zapata.conf. (Off course found via google, mailinglist,
voip-info etc) All calls resulting to be presented at the far end with
the network default caller id.

I'm lost, can somebody provide some assistance, attached is an output of
bri debug span 1 (this due to line wraps..)

But I think this is the network returning my error:
"Ext: 1  Cause: Invalid information element contents (100), class =
Protocol Error (6)"

My zapata is short, but as said the various caller id options have
passed through this file ;-)
zapata.conf:
--------------
[channels]
switchtype = euroisdn
pridialplan = dynamic
prilocaldialplan = local
nationalprefix = 0
internationalprefix = 00
musiconhold=default
echocancel = yes
echocancelwhenbridged = no
echotraining = 100
;-------------------------
signalling = bri_cpe_ptmp
context=pstn-inbound
group = 1
channel => 1-2
;-------------------------
signalling = bri_net_ptmp
context=isdn-inbound
group = 2
channel => 4-5

Part of dialplan:
------------------
exten => _0.,1,SetCallerID(${EDN_MAIN:1})
exten => _0.,2,Dial(${ZAP_MAIN}${EXTEN:1},30)
exten => _0.,3,Macro(dial-result)

exten => _9.,1,SetCallerID(${EDN_WORK:1})
exten => _9.,2,Dial(${ZAP_MAIN}${EXTEN:1},30)
exten => _9.,3,Macro(dial-result)

Variables:
-----------------
ZAP_MAIN=Zap/g1/
EDN_MAIN=022929XXX0
EDN_WORK=022927XXX7

The 022929XXX0 is the "default" msn, even if i try to set this
explicitly it gets rejected with the network message as mentioned above.
(But because it's default all calls will originate with 22929XXX0)

If more info is needed don't hesitate to ask for it I'm kind of lost on
what to provide.

Thanks in advance.

-- 
Met Vriendelijke groet/Yours Sincerely
Stijn Jonker <SJCJonker at sjc.nl>
-------------- next part --------------
    -- Executing SetCallerID("SIP/SJCC7960-ac64", "22927XXX7") in new stack
    -- Executing CallingPres("SIP/SJCC7960-ac64", "3") in new stack
    -- Executing Dial("SIP/SJCC7960-ac64", "Zap/g1/0646XXX645|30") in new stack
-- Making new call for cr 140
    -- Requested transfer capability: 0x00 - SPEECH
> Protocol Discriminator: Q.931 (8)  len=38
> Call Ref: len= 1 (reference 12/0xC) (Originator)
> Message type: SETUP (5)
> [04 03 80 90 a3]
> Bearer Capability (len= 5) [ Ext: 1  Q.931 Std: 0  Info transfer capability: Speech (0)
>                              Ext: 1  Trans mode/rate: 64kbps, circuit-mode (16)
>                              Ext: 1  User information layer 1: A-Law (35)
> [18 01 81]
> Channel ID (len= 3) [ Ext: 1  IntID: Implicit, Other Spare: 0, Preferred Dchan: 0
>                        ChanSel: B1 channel
                         ]
> [6c 0b 41 83 32 32 39 32 37 3X 3X 3X 37]
> Calling Number (len=13) [ Ext: 0  TON: Subscriber Number (4)  NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1)
>                           Presentation: Presentation allowed of network provided number (3) '22927XXX7' ]
> [70 0a a1 36 34 36 3X 3X 3X 36 34 35]
> Called Number (len=12) [ Ext: 1  TON: National Number (2)  NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) '646XXX645' ]
> [a1]
> Sending Complete (len= 1)
    -- Called g1/0646XXX445
< Protocol Discriminator: Q.931 (8)  len=12
< Call Ref: len= 1 (reference 140/0x8C) (Terminator)
< Message type: STATUS (125)
< [08 03 82 e4 6c]
< Cause (len= 5) [ Ext: 1  Coding: CCITT (ITU) standard (0) 0: 0   Location: Public network serving the local user (2)
<                  Ext: 1  Cause: Invalid information element contents (100), class = Protocol Error (6) ]
<              Cause data 1: 6c (108)
< [14 01 01]
< Call State (len= 3) [ Ext: 0  Coding: CCITT (ITU) standard (0) Call state: Call Initiated (1)
-- Processing IE 8 (cs0, Cause)
-- Processing IE 20 (cs0, Call State)
< Protocol Discriminator: Q.931 (8)  len=7
< Call Ref: len= 1 (reference 140/0x8C) (Terminator)
< Message type: CALL PROCEEDING (2)
< [18 01 89]
< Channel ID (len= 3) [ Ext: 1  IntID: Implicit, Other Spare: 0, Exclusive Dchan: 0
<                        ChanSel: B1 channel
                         ]
-- Processing IE 24 (cs0, Channel Identification)
< Protocol Discriminator: Q.931 (8)  len=8
< Call Ref: len= 1 (reference 140/0x8C) (Terminator)
< Message type: ALERTING (1)
< [1e 02 82 88]
< Progress Indicator (len= 4) [ Ext: 1  Coding: CCITT (ITU) standard (0) 0: 0   Location: Public network serving the local user (2)
<                               Ext: 1  Progress Description: Inband information or appropriate pattern now available. (8) ]
-- Processing IE 30 (cs0, Progress Indicator)
    -- Zap/1-1 is ringing