[Asterisk-Users] Panasonic KX-TD1232

[asterisk]

If the lines are put in seperrate groups according to destination then each
group can be accessed buy dialing 8+group number. Eg. 81 for trunks in group
1, 82 for group 2, etc

 

This applies to uk systems but I suspect the same feature exists in other
variants.

 

Neil

 

 

  _____  

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Dan Morin
Sent: 20 June 2005 03:52
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [Asterisk-Users] Panasonic KX-TD1232

 

If anyone has any experience with a Panasonic KX-TD1232 phone system, I
would really like to talk to you for a few minutes.

 

I have asterisk connected to a Panasonic system via FXS -> CO ports.  I'm
trying to get the Panasonic configured so that if someone dials a number (9)
while Intercom is selected, it will select a line in the correct trunk group
(Asterisk lines, rather than PSTN lines), then the user can finish dialing
the asterisk extension.  

 

Any ideas?  Thanks in advance.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050620/f4bc685f/attachment.htm