[Asterisk-Users] Zaphfc unable to dial out

[zakhooi at ilse.nl]

Im using bristuff-0.2.0-RC8g with two HFC-PCI controllers.

Inbound calls work just fine, but when im dialing out asterisk shows:
    -- Executing Macro("SIP/8010-20a1", "dial_out|xxxxxxxxxxx") in new stack
    -- Executing Answer("SIP/8010-20a1", "") in new stack
    -- Executing SetCallerID("SIP/8010-20a1", "xxxxxxxxxx") in new stack
    -- Executing Dial("SIP/8010-20a1", "ZAP/g1/xxxxxxxxxx") in new stack
    -- Requested transfer capability: 0x00 - SPEECH
    -- Called g1/xxxxxxxxxx
    -- Zap/1-1 is ringing
The operator then tells me "The number your calling is not used".

I've tried different numbers and different prefixes.
Outdialing works fine with my old chan_capi config with a fritz pci card.

Frits van Tiel