[Asterisk-Users] Nasty little incident ...

[Asterisk]

We have a te410p, with the following connections:

span 1 connected to a 32 Channel EuroISDN
span 2 connected to a card in a legacy pbx (Meridian)
span 3 connected to a 10 Channel EuroISDN
span 4 connected to a card in a legacy pbx (Meridian)

We have no need for the meridian now, and decided to turn it off. I did 
not change the zaptel.conf settings, nor the zapata.conf settings.

When the meridian was turned off, * would no longer allow any outbound 
or inbound calls through spans 1 and 3 (although these are connected to 
the pstn). When I turned the meridian back on - in a hurry I might add 
;) (had no time to play with configurations) and restarted *, then 
everything was ok again ...

Should I comment out span 2 and 4, run a ztcfg, unplug the cables in 2 
and 4, and then turn off the meridian ?

Julian.

/* zaptel.conf */

span=1,1,0,ccs,hdb3,crc4
bchan=1-15,17-31
dchan=16

span=2,0,0,ccs,hdb3,crc4
bchan=32-46,48-62
dchan=47

span=3,2,0,ccs,hdb3,crc4
bchan=63-77,79-93
dchan=78

span=4,0,0,ccs,hdb3,crc4
bchan=94-108,110-124
dchan=109

loadzone=uk
defaultzone=uk