[Asterisk-Users] ztcfg server crash

[Rod Bacon]

Thanks for the info.


Sergio Serrano wrote:
> Before change OS try to do next steps:
> 
> 	first, stop asterisk. Second, you must do "ztcfg -s" to shutdown
> span. Unload modules, load modules if you need and do ztcfg -vv again.
> Start asterisk
> 
> Regards
> 
> Srsergio
> 
> -----Mensaje original-----
> De: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] En nombre de Jason
> Walker
> Enviado el: martes, 14 de junio de 2005 6:07
> Para: 'Asterisk Users Mailing List - Non-Commercial Discussion'
> Asunto: RE: [Asterisk-Users] ztcfg server crash
> 
> 
> 
> 
> I tried to get * stable on a 2.6xxx kernel for about 2 weeks. Then tried
> it out on a FC1 2.4.xxx kernel and found none of the issues. I am sure
> others have had success with > 2.4.xxx, but I gave up;)
> 
> BTW - I was using a TE110P and then a TE405P card for the zaptel
> install. Both were setup as T1s not E1s. 
> 
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Rod Bacon
> Sent: Monday, June 13, 2005 7:44 PM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [Asterisk-Users] ztcfg server crash
> 
> I am running Debian Sarge with a custom 2.6.11 kernel.
> 
> I'll try building another kernel and recompiling the zaptel stuff.
> 
> 
> 
> Jason Walker wrote:
> 
>>What OS/distro are you running?
>>
>>I experienced the same on Gentoo with the 2.6.xxx kernel. Switched to
>>FC1 (2.4.xxx kernel) with the 1.0.7 CVS and have not had any issues.
>>
>>-----Original Message-----
>>From: asterisk-users-bounces at lists.digium.com
>>[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Rod
>>Bacon
>>Sent: Monday, June 13, 2005 7:31 PM
>>To: asterisk-users at lists.digium.com
>>Subject: [Asterisk-Users] ztcfg server crash
>>
>>I was wondering if anyone had experienced the following with asterisk
>>stable.
>>
>>After a period of time (can vary), If I stop asterisk and try to run
>>ztcfg -v to reinitialise my quad e1 card, the server will lock up. 
>>Sometimes it's a complete lockup, where it won't even return pings, 
>>other times it seems to be "partially screwed".
>>
>>
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> 
>