[Asterisk-Users] Making Asterisk NOT Pickup a Line when Ringing?

[Matt]

Ahhh!  That's even better.. and explains why it will answer with even a wait :)

On 6/14/05, Brian McSpadden <mcspadden at gmail.com> wrote:
> Everybody seems to be beating around the bush, and with a broken wiki,
> I'll just answer it.
> 
> If you set immediate=no above the channel declaration in zapata.conf,
> it will not answer the line automatically. It still would if asterisk
> was told to, however.
> 
> Brian
> 
> On 6/14/05, Matt <mhoppes at gmail.com> wrote:
> > Ok.... yes that should work.. but if it's not defined.. how do you
> > propose I make outgoing calls with it?
> >
> > On 6/14/05, Bryce Chidester <bryce at rhinoequipment.com> wrote:
> > > On Jun 14, 2005, at 09:04, Matt wrote:
> > > > Hi,
> > > > What do I need to do to get asterisk to NOT pickup a Zap channel when
> > > > it rings?  The channel in question is used for outbound calls only,
> > > > and all incoming calls are answered by an analog phone elsewhere in
> > > > the building that does not run through asterisk... so.. either make it
> > > > not answer.. or make it delay for like 90 seconds.. I've tried
> > > > wait's.. but it still seems to pickup the channel (even without an
> > > > answer!)
> > >
> > > Simply not defining the channel in zaptel/zapata (either or both, but
> > > primarily zapata) should do it. If Asterisk doesn't know about the
> > > channel, then it won't know it's ringing.
> > >
> > > Regards,
> > > Bryce Chidester
> > > Rhino Equipment Corp.
> > > bryce at rhinoequipment.com        SIP: 305 at rhinoequipment.zapto.org
> > > +1 (480) 940-1826 x305                IAX:
> > > guest at rhinoequipment.zapto.org/305
> > >
> > >
> > >
> > >
> > >
> > >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> >
>