[Asterisk-Users] Re: POLYCOM IP 500 Setup

[Kanuri, Seshu (Company IT)]

Asterisk at home will not be able to configure polycom500 phones.
 
You need to add this entry in sip.conf manually with one additional line
as under:
 
progressinband=no
 
Seshu
 

  _____  

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Noah
Miller
Sent: Monday, June 13, 2005 9:44 AM
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] Re: POLYCOM IP 500 Setup



Hi Matt -



	Hello, I just wiped out my old asterisk install and installed
Asterisk 

	at Home.  I was quickly able to get my Digium TDM422P working, 2
POTS 

	lines, 2 phones.  I also got X-Lite working as a SIP extension.
I then 

	tried to setup my Polycom IP 500, and this was not so easy...

	
	

	Using AMP I created SIP extension 205 to be used with my Polycom
phone.  

	I setup username = 205, secret = 123, context = from-internal.

	
	

	I setup my phone to have a static IP address, then pointed my
web 

	browser at it, to setup my phone.

	I setup Sip Conf with: Address = "IP of * server",  Server1 =
"IP of * 

	Server"

	Under Registration, I setup: Identification: Address = "IP of *
Server" 

	, Auth User ID = 205,  Auth Password = 123, Server1: Address =
"IP of * 

	server"


For your phone-specific file, address isn't the asterisk address, it is
the sip address of the phone - you can just use "205".


- Noah
--------------------------------------------------------

NOTICE: If received in error, please destroy and notify sender.  Sender does not waive confidentiality or privilege, and use is prohibited.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050613/b4d31efa/attachment.htm