[Asterisk-Users] how to tell

[Chris Coulthurst]

Reading a little bit on the web, Im getting the impression this may not be
easy to do with the SPA-2002.  Apparently Asterisk expects an  RTP "DTMF
named event"  16 to interpret a FXS flash over a SIP line.  I may be
completely wrong about this but I was reading this from this page refering
to a Linksys device with similar problems.  Also mentioned on another was
that the SPA-3000 solves these flash issues.
 
Read these if you'd like:
 
http://bugs.digium.com/view.php?id=4283
<http://bugs.digium.com/view.php?id=4283&nbn=8> &nbn=8
http://voxilla.com/modules.php?op=modload
<http://voxilla.com/modules.php?op=modload&name=News&file=article&sid=161>
&name=News&file=article&sid=161
 
Hope any of that helps...
 
Chris Coulthurst
 <mailto:chris at shuksan.com> chris at shuksan.com
 

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Todd A. Riker
Sent: Sunday, June 12, 2005 2:17 PM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [Asterisk-Users] how to tell



This helps, Chris.  When I press the flash key on my analog phone (connected
to SPA-2002), Asterisk does not display this info.  I believe that Asterisk
is either not receiving the hook flash from the Sipura or the Sipura is
intercepting it and not passing it to the Asterisk box.  I have call waiting
on my PSTN line, and I cannot flash the X100P card to switch to the other
call.  Do you have any ideas?  

 

Thanks

 


  _____  


From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Chris
Coulthurst
Sent: Sunday, June 12, 2005 4:09 PM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [Asterisk-Users] how to tell

 

With DEBUG set to 50 (probably much less would do it) I get this message:

2005-06-12 14:06:06 DEBUG[31276]: Got event Wink/Flash(3) on channel 2
(index 0)
2005-06-12 14:06:06 DEBUG[31276]: Winkflash, index: 0, normal: 22, callwait:
-1, thirdcall: -1
2005-06-12 14:06:06 DEBUG[31276]: Already have a dsp on Zap/2-2?
2005-06-12 14:06:06 DEBUG[31276]: Swapping 2 and 0
2005-06-12 14:06:06 DEBUG[31276]: disabled echo cancellation on channel 2
2005-06-12 14:06:06 VERBOSE[31280]:     -- Starting simple switch on
'Zap/2-2'
2005-06-12 14:06:06 VERBOSE[31276]:     -- Started three way call on channel
2

 

Is that what you wanted?

 

 

Chris Coulthurst

 <mailto:chris at shuksan.com> chris at shuksan.com

 

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Todd A. Riker
Sent: Sunday, June 12, 2005 1:41 PM
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] how to tell

How do I tell if Asterisk is receiving a flash hook command?  

 

Thanks

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050612/4d702640/attachment.htm