[Asterisk-Users] SIP Connection Timing Out BroadVoice

[Michael Stearne]

On 6/11/05, Rich Adamson <radamson at routers.com> wrote:
> 
> > I just signed up and configured a SIP connection from BroadVoice.  It
> > works great.  This issue I have is that it seems after a couple calls
> > (or a certain amount of time) Asterisk doesn't seem to be receiving
> > these calls anymore.  It seems as if BroadVoice is not redirecting the
> > call to my Asterisk.
> >
> > Asterisk still seems to be ready for the call:
> > *CLI> sip show  registry
> > Host                            Username       Refresh State
> > sip.broadvoice.com:5060         609299xxxx at s      3584 Registered
> > *CLI> sip show peers
> > Name/username              Host            Dyn Nat ACL Mask
> >  Port     Status
> > sip.broadvoice.com/609299  147.135.0.128               255.255.255.255
> >  5060     Unmonitored
> > 1 sip peers [1 online , 0 offline]
> >
> > Any ideas why this is happening?
> 
> Try adding
>  qualify=2000
> to the sip.conf definition for broadvoice. See if that helps.
> 

Thanks!

Michael

> 
> 
>