[Asterisk-Users] TE410P and Siemens HIPATH 3750

[Sergio Serrano]

Hi all,
    I have to interconnect Asterisk with a Siemens HIPATH 3750. In
siemens we can configure ECMA-QSIG Master, ISO-QSIG Master, Point to
Point link with CRC4 and Point to Point link withouth CRC4): Siemens has
BNC connector. 
 
I use a balun with BNC and RH45 connectro. I try with basic RJ45 cable
and with crossover RJ45(1-4, 2-5) but I can only see yellow led in
TE410P.
 
I have configured siemens like Point to Point with and withouth CRC4 and
Asterisk with ccs,hdb3 ( with CRC4 and withouth CRC4), with pri_net and
pri_cpe and signalling=euroisdn
 
Anyone has experience with this scenario?
 
 
Regards,
 
srsergio
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050610/9aa0db88/attachment.htm