[Asterisk-Users] CallerID/chan_sccp

[Mark Johnson]

Joseph wrote:

>On Thu, 2005-06-09 at 11:57 -0400, Mark Johnson wrote:
>  
>
>>I just downloaded the latest chan_sccp and am having problems with 
>>internal to internal calls with callerid.  I added a few debug lines to 
>>the code to help sort it out, but here's what happens...  Exten 581 
>>calls 580.  On the display 581 shows "Unknown number to 580".  On exten 
>>580, the display shows "Test Phone2 to Unknown number".  Here are some 
>>of the lines from the CLI including my added debug lines:
>>
>>    -- Set calledParty Name: Test Phone1 Number 580
>>    -- Executing Dial("SCCP/581-00000005", "SCCP/580|15|Ttr") in new stack
>> SCCP trying to call SCCP, format 4, data, 580
>>    --  --*> 581
>>    -- New channel context: office
>>    -- Asterisk request to call: SCCP/580-00000006
>>    -- Set callingParty Name: Test Phone2 Number 581
>>  == Sending Packet Type SetLampMessage (16 bytes)
>>  == Sending Packet Type SetRingerMessage (8 bytes)
>>  == {CallStateMessage} callState=RingIn(4), lineInstance=1, callReference=6
>>  == Sending Packet Type CallStateMessage (28 bytes)
>>*** Calling Party Name: Test Phone2
>>*** Calling Party Number: 581
>>*** Called Party Name:
>>*** Called Party Number:
>>  == Sending Packet Type CallInfoMessage (208 bytes)
>>  == Sending Packet Type DisplayPromptStatusMessage (48 bytes)
>>  == {SelectSoftKeysMessage} lineInstance=1 callReference=6 
>>softKeySetIndex=3 validKeyMask=65535/65535
>>  == Sending Packet Type SelectSoftKeysMessage (20 bytes)
>>    -- Called 580
>>    -- Asked to indicate '3' (Dialing) condition on channel 
>>SCCP/581-00000005
>>    -- Current tone (36) is equiv to wanted tone (36).  Ignoring.
>>  == Sending Packet Type DisplayPromptStatusMessage (48 bytes)
>>  == {CallStateMessage} callState=RingOut(3), lineInstance=1, 
>>callReference=5
>>  == Sending Packet Type CallStateMessage (28 bytes)
>>*** Calling Party Name:
>>*** Calling Party Number:
>>*** Called Party Name: Test Phone1
>>*** Called Party Number: 580
>>
>>
>>The lines beginning with "***" are the debug lines I added inside the 
>>sccp_channel_send_callinfo function.  Any ideas?
>>
>>Mark
>>
>>    
>>
>
>Is this CVS-HEAD?
>
>It seems to work fine on cvs head.
>
>I think there where some changes in the current cvs head vs the stable
>that may make stable caller id not work.
>
>  
>
Cisco 7910's and CVS-HEAD from 06/03/05.