[Asterisk-Users] EuroISDN Italy - quadbri - zaptel.conf - what settings work ?

[Matteo Brancaleoni]

You're connected to a p2mp bri, switch to bri_cpe_p2mp

Matteo.

Il giorno mer, 08-06-2005 alle 19:54 +0200, Robert Rozman ha scritto:
> Hi,
> 
> I'm pulling my hair out, cause cannot connect to EuroISDN BRI in Italy with
> octobri card from Beronet. I use bristuff and have following zaptel.conf...
> 
> #
> # This file is parsed by the Zaptel Configurator, ztcfg
> #
> #
> # First come the span definitions, in the format
> # span=<span num>,<timing>,<line build out
> (LBO)>,<framing>,<coding>[,yellow]
> #
> # The timing parameter determines the selection of primary, secondary, and
> # so on sync sources.  If this span should be considered a primary sync
> # source, then give it a value of "1".  For a secondary, use "2", and so on.
> # To not use this as a sync source, just use "0"
> #
> loadzone=it
> defaultzone=it
> 
> span=1,1,3,ccs,ami
> span=2,0,3,ccs,ami
> span=3,0,3,ccs,ami
> span=4,0,3,ccs,ami
> span=5,0,3,ccs,ami
> span=6,0,3,ccs,ami
> span=7,0,3,ccs,ami
> span=8,0,3,ccs,ami
> 
> bchan=1,2
> dchan=3
> bchan=4,5
> dchan=6
> bchan=7,8
> dchan=9
> bchan=10,11
> dchan=12
> 
> bchan=13,14
> dchan=15
> bchan=16,17
> dchan=18
> bchan=19,20
> dchan=21
> bchan=22,23
> dchan=24
> 
> I get this on bri intense debug...
> 
> 
> > Unnumbered frame:
> > SAPI: 63  C/R: 0 EA: 0
> >  TEI: 127        EA: 1
> >   M3: 0   P/F: 0 M2: 0 11: 3  [ UI (unnumbered information) ]
> > 5 bytes of data
> Sending TEI Request ri=64864
> 
> > [ fc ff 03 0f fd 60 01 ff ]
> 
> > Unnumbered frame:
> > SAPI: 63  C/R: 0 EA: 0
> >  TEI: 127        EA: 1
> >   M3: 0   P/F: 0 M2: 0 11: 3  [ UI (unnumbered information) ]
> > 5 bytes of data
> Sending TEI Request ri=39384
> 
> > [ fc ff 03 0f 99 d8 01 ff ]
> 
> > Unnumbered frame:
> > SAPI: 63  C/R: 0 EA: 0
> >  TEI: 127        EA: 1
> >   M3: 0   P/F: 0 M2: 0 11: 3  [ UI (unnumbered information) ]
> > 5 bytes of data
> Sending TEI Request ri=38343
> 
> > [ fc ff 03 0f 95 c7 01 ff ]
> 
> > Unnumbered frame:
> > SAPI: 63  C/R: 0 EA: 0
> >  TEI: 127        EA: 1
> >   M3: 0   P/F: 0 M2: 0 11: 3  [ UI (unnumbered information) ]
> > 5 bytes of data
> 
> 
> 
> Thanks very much in advance,
> 
> regards,
> 
> Rob.
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users