[Asterisk-Users] Xlite not communicating with Asterisk

Shahan Kalutanthri shahan at lankabell.com
Wed Jun 8 02:33:18 MST 2005


on the asterisk console put a "sip debug" and see if you get any debug
information.
coz even though you extension.conf or sip.conf is not properly configured
still you should get the debug info..!!
 
shahan

-----Original Message-----
From: Mohamed A. Gombolaty [mailto:mgombolaty at noorgroup.net] 
Sent: Wednesday, June 08, 2005 3:11 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Xlite not communicating with Asterisk


Hi Shahan, 

yes both are in the same LAN 


Thx 
MAG 
  


Shahan Kalutanthri wrote: 


HI..!! 

Is you windows PC & the Asterisk in the same LAN. 


-----Original Message----- 
From: Mohamed A. Gombolaty [mailto:mgombolaty at noorgroup.net
<mailto:mgombolaty at noorgroup.net> ] 
Sent: Wednesday, June 08, 2005 2:29 PM 
To: asterisk-users at lists.digium.com 
Subject: [Asterisk-Users] Xlite not communicating with Asterisk 


Dear All, 


I have downloaded the xlite version 2.0 for windows and I made the following

conf in the xlite itself as the document suggested in order to make it work 
with Asterisk but still it doesn't work as a matter of fact when I tried to 
make a tcp dump I can see no packets going between the windows client and 
the Asterisk server at all, here is the my conf on the xlite itself: 


in the Menu>System Settings>SIP Proxy>Deafult 


Enabled: yes 
Display Name: 
Username: 
Authorization User: 
Password: xxxx 
Domain/Realm: mysip.server.com 
SIP Proxy: 192.168.99.243 
Outbound Proxy: 
Use Outblound Proxy: Default 
Send internal IP: Always 
Register: Always 
Direct Dial IP: NO 
DIal Prefix: 


my sip.conf for the device is as follow: 


[881] 
;Turn off silence suppression in X-Lite ("Transmit Silence"=YES)! ;Note that

Xlite sends NAT keep-alive packets, so qualify=yes is not needed type=friend

secret=xxxx callerid="Mohamed Mahmoud" <881> host=dynamic dtmfmode=inband 
context=from-sip canreinvite=no disallow=all allow=gsm 


ofcourse I added in the context mentioned above the macro I use with all my 
extensions. 


-- 
Thx 
MAG 


_______________________________________________ 
Asterisk-Users mailing list 
Asterisk-Users at lists.digium.com 
http://lists.digium.com/mailman/listinfo/asterisk-users
<http://lists.digium.com/mailman/listinfo/asterisk-users>  
To UNSUBSCRIBE or update options visit: 
   http://lists.digium.com/mailman/listinfo/asterisk-users
<http://lists.digium.com/mailman/listinfo/asterisk-users>  


This e-mail may contain confidential and/or privileged information. 
If you are not the intended recipient or have received this e-mail in error,

please notify the sender immediately and destroy this e-mail. Any 
unauthorised copying, disclosure or distribution of the material in this 
e-mail is strictly forbidden. 


_______________________________________________ 
Asterisk-Users mailing list 
Asterisk-Users at lists.digium.com 
http://lists.digium.com/mailman/listinfo/asterisk-users
<http://lists.digium.com/mailman/listinfo/asterisk-users>  
To UNSUBSCRIBE or update options visit: 
   http://lists.digium.com/mailman/listinfo/asterisk-users
<http://lists.digium.com/mailman/listinfo/asterisk-users> 

-- 

Thx

MAG
  



This e-mail may contain confidential and/or privileged information.
If you are not the intended recipient or have received this e-mail in error,
please notify the sender immediately and destroy this e-mail. Any
unauthorised copying, disclosure or distribution of the material in this
e-mail is strictly forbidden. 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050608/f3dab337/attachment.htm


More information about the asterisk-users mailing list