[Asterisk-Users] connecting Asterisk to NEC NEAX system

[Edwin Lam]

hi. i connected Asterisk to an NEC NEAX system with a crossover T1 cable
and the Digium TE405P using E&M wink signaling. the connection's ok. however
when dialing from the NEC to the Asterisk. most of the time the Asterisk only
sees the first digit of the dialed number(which is 4 digits). some time if i
dialed the 4 digits very fast it might get through. seems like there's a timming
issue of the DTMF. what can i do to solve this? i looked through the docs
for zaptel.conf & zapata.conf and doesn't seems there's any parameters to
control the DTMF timing.

-- 
Edwin Lam <edwin at officegeneral.com>
Systems Engineer, Office General, Inc.
Ph: +1 415 439 4988 Fax: +1 415 283 3370
http://pgpkeys.mit.edu:11371/pks/lookup?op=get&search=0xD6506D20