[Asterisk-Users] TE410P

[Juan Pablo Abuyeres]

Hi. I'm just trying to install a TE410P card (jumped as E1). But I'm
having problems loading the kernel module.

[root at asterisk1 src]# modprobe wct4xxp
/lib/modules/2.4.21-32.0.1.ELsmp/misc/wct4xxp.o: init_module: No such
device
Hint: insmod errors can be caused by incorrect module parameters,
including invalid IO or IRQ parameters.
      You may find more information in syslog or the output from dmesg
/lib/modules/2.4.21-32.0.1.ELsmp/misc/wct4xxp.o:
insmod /lib/modules/2.4.21-32.0.1.ELsmp/misc/wct4xxp.o failed
/lib/modules/2.4.21-32.0.1.ELsmp/misc/wct4xxp.o: insmod wct4xxp failed
[root at asterisk1 src]#

I've read lspci should show the card as something like Communication
controller: Xilinx Corporation, but on my system it looks like this:
02:08.0 Communication controller: Unknown device d161:0410 (rev 02)

lspci -v says:
02:08.0 Communication controller: Unknown device d161:0410 (rev 02)
        Flags: bus master, medium devsel, latency 32, IRQ 52
        Memory at dd200000 (32-bit, non-prefetchable) [size=128]

and there is no other device using IRQ 52.

[root at asterisk1 src]# cat /proc/interrupts
           CPU0       CPU1
  0:      37107      40339    IO-APIC-edge  timer
  1:          0          4    IO-APIC-edge  keyboard
  2:          0          0          XT-PIC  cascade
  8:          0          1    IO-APIC-edge  rtc
 12:         28        373    IO-APIC-edge  PS/2 Mouse
 15:          0          2    IO-APIC-edge  ide1
 18:       4284       4293   IO-APIC-level  libata
 24:       4645         21   IO-APIC-level  eth0
NMI:          0          0
LOC:      77355      77353
ERR:          0
MIS:          0
[root at asterisk1 src]#

any ideas?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050607/3d5ccb14/attachment.htm