[Asterisk-Users] Problems with Junghanns QuadBri

[Daniele]

Thanks for answering so quickly, I have tried several zapata.conf and
zaptel.conf with no result: this is the latest try

zaptel.conf

loadzone=it
defaultzone=it
# qozap span definitions
# most of the values should be bogus because we are not really zaptel
span=1,1,3,ccs,ami
span=2,0,3,ccs,ami
span=3,0,3,ccs,ami
span=4,0,3,ccs,ami

bchan=1,2
dchan=3
bchan=4,5
dchan=6
bchan=7,8
dchan=9
bchan=10,11
dchan=12



zapata.conf

[channels]
;
; Default language
;
;language=en
;
; Default context
;
;
switchtype = euroisdn

; p2mp TE mode (for connecting ISDN lines in point-to-multipoint mode)
;signalling = bri_cpe_ptmp
; p2p TE mode (for connecting ISDN lines in point-to-point mode)
signalling = bri_cpe
; p2mp NT mode (for connecting ISDN phones in point-to-multipoint mode)
;signalling = bri_net_ptmp
; p2p NT mode (for connecting an ISDN pbx in point-to-point mode)
;signalling = bri_net

pridialplan = local
prilocaldialplan = local
nationalprefix = 0
internationalprefix = 00

echocancel = yes

context=demo
group = 1
; S/T port 1
channel => 1-2

group = 2
; S/T port 2
channel => 4-5

group = 3
; S/T port 3
channel => 7-8

group = 4
; S/T port 4
channel => 10-11


and this is the error I get:

 [chan_zap.so] => (Zapata Telephony w/PRI)
  == Parsing '/etc/asterisk/zapata.conf': Found
Jun  7 11:02:07 WARNING[13324]: chan_zap.c:925 zt_open: Unable to
specify channel 1: No such device or address
Jun  7 11:02:07 ERROR[13324]: chan_zap.c:6442 mkintf: Unable to open
channel 1: No such device or address
here = 0, tmp->channel = 1, channel = 1
Jun  7 11:02:07 ERROR[13324]: chan_zap.c:10270 setup_zap: Unable to
register channel '1-2'
Jun  7 11:02:07 WARNING[13324]: loader.c:345 ast_load_resource:
chan_zap.so: load_module failed, returning -1
  == Unregistered channel type 'Tor'
  == Unregistered channel type 'Zap'
Jun  7 11:02:07 WARNING[13324]: loader.c:440 load_modules: Loading
module chan_zap.so failed!


Thanks,

Daniele