[Asterisk-Users] Problems with Junghanns QuadBri

[Dpto. Técnico.]

It's appear that you have defined 4 channels in you zapata.conf, but the
ztcfg -tvv only detect 2B and 1D.

Can you paste you zapata.conf?

Regards

----- Original Message ----- 
From: "Daniele Gianetti" <dgianetti at hoplo.com>
To: <asterisk-users at lists.digium.com>
Sent: Tuesday, June 07, 2005 10:21 AM
Subject: [Asterisk-Users] Problems with Junghanns QuadBri


Hi all,
i'm trying to install Asterisk with Junghanns QuadBri ISDN card: I have
followed all the instructions, and when I run "|ztcfg -tvv" I get

|

| Zaptel Configuration
======================|

SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1)

Channel map:

Channel 01: Individual Clear channel (Default) (Slaves: 01)
Channel 02: Individual Clear channel (Default) (Slaves: 02)
Channel 03: D-channel (Default) (Slaves: 03)

3 channels configured.

But when I try to start asterisk with "|asterisk -vvvvvvc" I get this
error message:
|

[chan_zap.so] => (Zapata Telephony w/PRI)
== Parsing ‘/etc/asterisk/zapata.conf’: Found
Jun 6 21:18:31 WARNING[3375]: chan_zap.c:925 zt_open: Unable to specify
channel 4: No such device or address
Jun 6 21:18:31 ERROR[3375]: chan_zap.c:6442 mkintf: Unable to open
channel 4: No such device or address
here = 0, tmp->channel = 4, channel = 4
Jun 6 21:18:31 ERROR[3375]: chan_zap.c:10270 setup_zap: Unable to
register channel ‘4-5′
Jun 6 21:18:31 WARNING[3375]: loader.c:345 ast_load_resource:
chan_zap.so: load_module failed, returning -1
== Unregistered channel type ‘Tor’
== Unregistered channel type ‘Zap’
Jun 6 21:18:31 WARNING[3375]: loader.c:440 load_modules: Loading module
chan_zap.so failed!

Can someone help me with this issue?
Thanks,

Daniele (dgianetti at hoplo.com)

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users