[Asterisk-Users] IRQ Problems

[Tom Hayden]

Is there some kind of guide available or information about connecting
to the adit or using it's CLI console? All I have is a null-modem
cable. Will that work?  Thanks

--
Tom

On 6/6/05, Zoa <zoachien at securax.org> wrote:
> 
> Hmm, looks like i sent that email a little too fast. ( i scanned through
> the email but didn't read it all for some reason... sorry)
> You seem to have two problems, the error is not related to a shared irq
> but to a setting on either the adit 600 or in the zapata.conf
>  From your last email it looks like you need to change something on the
> adit 600. (i dont have an adit 600 myself so i dont know what exactly).
> 
> Cheers,
> 
> Zoa.
> 
> Zoa wrote:
> 
> >
> > The sharing of an IRQ is indeed a problem
> >
> > Read this tutorial to know exactly what to do:
> >
> > http://www.asteriskguru.com/tutorials/pci_irq_apic_tdm_ticks_te410p_te405p_noise.html
> >
> >
> > Greetings,
> >
> > zoa,
> >
> > Tom Hayden wrote:
> >
> >> Hello
> >> I just installed a TE110P in a Dell Poweredge 750 (rackmount), which
> >> is connected via crossover T1 cable to a adit 600.  Anyway, I've
> >> encountered an array of errors, which I believe I have narrowed down
> >> to the 22 IRQ misses I encounter on zttool. I've noticed that the
> >> te110p and the usb device share an IRQ. Could that be the source of my
> >> woes? Would disabling the usb device in the bios solve my problems or
> >> could it be my configuration?
> >>
> >> -- Errors generated by asterisk
> >> chan_zap.c:7970 pri_dchannel: PRI Error: We think we're the CPE, but
> >> they think they're the CPE too.
> >>
> >> ---zaptel.conf
> >> defaultzone=us
> >> span=1,1,0,esf,b8zs
> >> bchan=1-23
> >> dchan=24
> >> loadzone=us
> >>
> >> -- zapata.conf (relevant portions)
> >> signalling = pri_cpe
> >> switchtype = national
> >> group = 2
> >> context = fxoout
> >> cidsignalling = dtmf
> >> cidstart = polarity
> >> channel => 1-23
> >>
> >> -- proc/interrupts
> >>           CPU0
> >>  0:    6334299    IO-APIC-edge  timer
> >>  1:      14390    IO-APIC-edge  keyboard
> >>  2:          0          XT-PIC  cascade
> >>  8:          3    IO-APIC-edge  rtc
> >> 14:          2    IO-APIC-edge  ide0
> >> 15:     505440    IO-APIC-edge  ide1
> >> 21:     150019   IO-APIC-level  eth1
> >> 22:   63326503   IO-APIC-level  t1xxp
> >>
> >> -- lspci -bv | grep IRQ
> >> Flags: bus master, medium devsel, latency 0, IRQ 11
> >>        Flags: bus master, medium devsel, latency 0, IRQ 10 (USB)
> >>        Flags: bus master, fast devsel, latency 0, IRQ 255
> >>        Flags: bus master, medium devsel, latency 0, IRQ 7
> >>        Flags: medium devsel, IRQ 5
> >>        Flags: bus master, 66Mhz, medium devsel, latency 0, IRQ 3
> >>        Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 11
> >>        Flags: bus master, medium devsel, latency 32, IRQ 10 (**TE110P**)
> >>        Flags: bus master, VGA palette snoop, stepping, medium devsel,
> >> latency 32, IRQ 255
> >>
> >> Thanks in Advance,
> >>
> >>
> >>
> >
> >------------------------------------------------------------------------
> >
> >_______________________________________________
> >Asterisk-Users mailing list
> >Asterisk-Users at lists.digium.com
> >http://lists.digium.com/mailman/listinfo/asterisk-users
> >To UNSUBSCRIBE or update options visit:
> >   http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> 
> 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> 
> 


-- 
Tom