[Asterisk-Users] IRQ Problems

[Gustavo Alvarez]

The problem is that both adit600 and Asterisk box are configured as 
clock slaves (pri_cpe).
Change pri_cpe to pri_net in your zapata.conf, and your asterisk box 
would be the clock source.
It should work. Good Luck.

Argentilinux.

Tom Hayden escribió:

>Hello
>I just installed a TE110P in a Dell Poweredge 750 (rackmount), which
>is connected via crossover T1 cable to a adit 600.  Anyway, I've
>encountered an array of errors, which I believe I have narrowed down
>to the 22 IRQ misses I encounter on zttool. I've noticed that the
>te110p and the usb device share an IRQ. Could that be the source of my
>woes? Would disabling the usb device in the bios solve my problems or
>could it be my configuration?
>
>-- Errors generated by asterisk 
>chan_zap.c:7970 pri_dchannel: PRI Error: We think we're the CPE, but
>they think they're the CPE too.
>
>---zaptel.conf
>defaultzone=us
>span=1,1,0,esf,b8zs
>bchan=1-23
>dchan=24
>loadzone=us
>
>-- zapata.conf (relevant portions)
>signalling = pri_cpe
>switchtype = national
>group = 2
>context = fxoout
>cidsignalling = dtmf
>cidstart = polarity
>channel => 1-23
>
>-- proc/interrupts
>           CPU0
>  0:    6334299    IO-APIC-edge  timer
>  1:      14390    IO-APIC-edge  keyboard
>  2:          0          XT-PIC  cascade
>  8:          3    IO-APIC-edge  rtc
> 14:          2    IO-APIC-edge  ide0
> 15:     505440    IO-APIC-edge  ide1
> 21:     150019   IO-APIC-level  eth1
> 22:   63326503   IO-APIC-level  t1xxp
>
>-- lspci -bv | grep IRQ
> Flags: bus master, medium devsel, latency 0, IRQ 11
>        Flags: bus master, medium devsel, latency 0, IRQ 10 (USB)
>        Flags: bus master, fast devsel, latency 0, IRQ 255
>        Flags: bus master, medium devsel, latency 0, IRQ 7
>        Flags: medium devsel, IRQ 5
>        Flags: bus master, 66Mhz, medium devsel, latency 0, IRQ 3
>        Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 11
>        Flags: bus master, medium devsel, latency 32, IRQ 10 (**TE110P**)
>        Flags: bus master, VGA palette snoop, stepping, medium devsel,
>latency 32, IRQ 255
>
>Thanks in Advance,
>
>  
>