[Asterisk-Users] te410p not working after cvs-head update

[Asterisk]

Thanks Kevin, but I have done all you suggested. There is a closed bug 
on the bug tracking system (#4155) which seems to suggest a problem with 
1st gen cards and the 2nd gen driver. Looks as if I need to speak to 
tech support (again - the te410P was a bugger to get going in a HP 
proliant DL-380, had to get another card sent)

Julian.

Kevin Bockman wrote:
>>From: Asterisk 
>>
>>I have a TE410P running on CentOS 4 which (fortunately) is my test 
>>system. This card has been working flawlessly for the past few weeks. 
>>Today I did a cvs update to the latest head files, and the card is now 
>>not working. When I try a zaptel start, a series of messages appears on 
>>the console:
>>
>>Found TE410p at base address fdff0000, remapped to f8a34000
>>TE410P version c01a010b, burst ON, slip debug: OFF
>>TE410P running with work queues.
>>FALC version: 00000005, Board ID: 00
>>..
>>(a series of Reg Values)
>>..
>>This driver does not support 1st gen modules
>>
>>and at the tty used to start the zaptel service:
> 
> 
> I don't have any experience with this, but from what I have read from
> here you need to upgrade zaptel along with asterisk.  Did you do that? 
> Also try clearing out your modules directory first. Update asterisk AND
> zaptel, then do an install.
> 
> If that doesn't work, someone else will have to help.
> 
> 
> Kevin
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
>