[Asterisk-Users] Does Debian Bristuffed Asterisk work ignoreBeronet cards ?

[Robert Rozman]

----- Original Message ----- 
From: "Emanuele Pucciarelli" <ep at acm.org>
To: "Asterisk Users Mailing List - Non-Commercial Discussion" 
<asterisk-users at lists.digium.com>
Sent: Thursday, June 02, 2005 7:44 PM
Subject: Re: [Asterisk-Users] Does Debian Bristuffed Asterisk work 
ignoreBeronet cards ?


> Robert Rozman wrote:
>
>> when loading qozap it says that no multibri card was found although
>> lspci shows it... There were quite some rumours about bristuff not
>> liking other than junghanns cards, but don't know if something 
>> happened....
>
> http://www.beronet.com/download/card_installation_guide_en.pdf
>
> On page 37 you'll find that bristuff must be patched in order to
> recognize other cards.
>
Hi,

thanks for info. I've read that but on quadbri Beronet card we purchased 2 
months ago everything worked without any changes... Do you know where to 
find those patches and if they are really necessary ?

Thanks in advance,

regards,

Rob.


>> Anyone recently used this card and Debian Asterisk and can confirm that
>> this is working ? Any advice or hint, what should be done to get it into
>> working state ?
>
> I've never tried, but in similar situations I've changed the PCI ids in
> the drivers.  This will surely make any driver recognise the card; it
> doesn't mean that it will surely work, though :)
>
> -- 
> Emanuele
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users