[Asterisk-Users] IVR Load

[Mohamed A. Gombolaty]

Dear All,

I was trying to enable call forwarding, following the steps of the link on
voip.org regarding this issue it doesn't work and the phone I am trying to
implement on is still ringing. below is my conf in extensions.conf and the
CLI output during the process.

My configuration is :

exten => _*5X.,1,DBput(CF/${CALLERIDNUM}=${EXTEN:2})
exten => _*5X.,2,Hangup

exten => *5,1,DBdel(CF/${CALLERIDNUM})
exten => *5,2,Hangup

[macro-stdexten]
;
; Standard extension macro (with call forwarding):
; ${ARG1} - Extension(we could have used ${MACRO_EXTEN} here as well
; ${ARG2} - Device(s) to ring
;
exten => s,1,DBget(temp=CF/${ARG1})
exten => s,2,Goto(${temp}|1)
exten => s,102,Goto(s|3)
exten => s,3,Dial(${ARG2},120)
exten => s,103,Goto(s|50)
exten => s,4,Voicemail(u${ARG1})
exten => s,5,Hangup
exten => s,104,Voicemail(b${ARG1}) ; busy
exten => s,105,Hangup

the output on the CLI during this process was:

*CLI>
    -- Executing DBdel("SIP/777-a77c", "CF/777") in new stack
    -- DBdel: family=CF, key=777
Urgent handler
    -- Executing Hangup("SIP/777-a77c", "") in new stack
Urgent handler
    -- Executing DBput("SIP/777-ad46", "CF/777=888") in new stack
    -- DBput: family=CF, key=777, value=888
Urgent handler
    -- Executing Hangup("SIP/777-ad46", "") in new stack
Urgent handler

*CLI>
*CLI>
    -- Executing Dial("SIP/999-8f50", "SIP/777|7|tr") in new stack
    -- Called 777
Urgent handler
Urgent handler
    -- SIP/777-82e9 is ringing
Urgent handler

Any Idea what's wrong

--
Thx
MAG


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050601/137f3aac/attachment.htm