[Asterisk-Users] dialplan defenition

[Joao Pereira]

but everytime I dont put the "s", when I try to call 74XXX, Asterisk 
answers :

pbx.c:1877 ast_pbx_run: Channel 'CAPI[contr1/118]/1' sent into invalid 
extension 's' in context 'default', but no invalid handler

I think it must be something like that:

exten => _74XXX,1,Dial(SIP/${EXTEN}@1193.136.252.5,30,r)
... but it always answers:
pbx.c:1877 ast_pbx_run: Channel 'CAPI[contr1/118]/1' sent into invalid
extension 's' in context 'default', but no invalid handler



It must be a way to do it...
Thanks
João

Moises Silva wrote:

>Please read this docs:
>http://www.voip-info.org/tiki-index.php?page=Asterisk+config+extensions.conf
>
>you need to understand what the 's' extension does. If you use it, no
>matter what number they have dialed, it will start at the s extensión.
>If i understand your goal, YOU DONT NEED the 'exten => s,1,Answer' .
>
>You have:
>  
>
>>;exten => s,1,Answer
>>;exten => _74XXX,1,Dial(SIP/${EXTEN}@1193.136.252.5,30,r)
>>    
>>
>
>please replace it for:
>exten => _74XXX,1,Answer()
>exten => _74XXX,2,Dial(SIP/${EXTEN}@1193.136.252.5,30,r)
>
>best regards
>
>On 7/29/05, Joao Pereira <joao.pereira at fccn.pt> wrote:
>  
>
>>Ok, now ill explain my dialplan problem
>>
>>Goal: When Asterisk receives a 74XXX number, should send it to its peer
>>in 193.136.252.5:5060 (SERs IP), someting like:
>> sip:74XXX at 193.136.252.5
>>Here is my extensions.conf and sip.conf
>>
>>------------------- EXTENSIONS.CONF
>>[general]
>>static=yes
>>writeprotect=no
>>
>>[globals]
>>CONSOLE=Console/dsp
>>
>>TRUNK=CAPI
>>
>>[default]
>>
>>; this way he works... but always dials sip:74118 at 193.136.252.5 ... not
>>yet what I want
>>;exten => s,1,Dial(SIP/74118 at 193.136.252.5,30,r)
>>
>>; this way, he dials "sip:s at 193.136.252.5" ...
>>;exten => s,1,Dial(SIP/${EXTEN}@193.136.252.5,30,r)
>>
>>;this way it works... but I have to dial:
>>; 74XXX then he gives me dialtone, and then I must dial 74XXX again...
>>; not yet what I want... the idea is just dial 74XXX once, withou
>>dialtones in between
>>;exten => s,1,Answer
>>;exten => _74XXX,1,Dial(SIP/${EXTEN}@1193.136.252.5,30,r)
>>
>>; what must I put here to dial  sip:74XXX at 193.136.252.5   ???
>>
>>-------------------SIP.CONF
>>[general]
>>context=default
>>
>>port=1720
>>bindaddr=193.136.252.5
>>
>>insecure=very
>>
>>realm=fccn.pt
>>
>>;defenition of SER as a peer
>>[193.136.252.5]
>>type=peer
>>username=193.136.252.5:5060
>>host=193.136.252.5
>>context=from-sip
>>canreinvite=no
>>insecure=very
>>
>>
>>
>>Thanks
>>Joao Pereira
>>-----------------------------------------------------------------------------
>>
>>
>>
>>Moises Silva wrote:
>>
>>    
>>
>>>the problem is how are you getting there? i mean, what do you have in
>>>sip.conf and please post all the relevant text in extensions.conf, not
>>>just the 'exten => blah' part, we need to know context names to see if
>>>its matching the sip.conf configuration
>>>
>>>regards
>>>
>>>On 7/28/05, Joao Pereira <joao.pereira at fccn.pt> wrote:
>>>
>>>
>>>      
>>>
>>>>I had tried that also, but it didnt work. In that case, if I dial 74118
>>>>(for example) Asterisk answers this:
>>>>
>>>>pbx.c:1877 ast_pbx_run: Channel 'CAPI[contr1/118]/0' sent into invalid
>>>>extension 's' in context 'default', but no invalid handler
>>>>
>>>>I think it needs the "s"... but how do I put the "s" and route the call
>>>>to 74XXX at 193.136.252.5 ????
>>>>Thanks
>>>>Joao
>>>>
>>>>
>>>>Christian Victor wrote:
>>>>
>>>>
>>>>
>>>>        
>>>>
>>>>>Joao Pereira schrieb:
>>>>>
>>>>>
>>>>>
>>>>>          
>>>>>
>>>>>>Im writing my dial plan, in witch every SIP phone begins with 74 and
>>>>>>has more 3 numbers (like 74XXX).
>>>>>>So, I want to route all 74XXX calls to my sip channel. For this I
>>>>>>wrote this line:
>>>>>>exten => s,1,Dial(SIP/74118 at 193.136.252.5,30,r)
>>>>>>
>>>>>>but this way all calls go to 74118 at 193.136.252.5  .....
>>>>>>
>>>>>>Then I tried:
>>>>>>exten => s,1,Dial(SIP/${EXTEN}@193.136.252.5,30,r)
>>>>>>
>>>>>>but this way, the system tries to dial  <sip:s at 193.136.252.5> and not
>>>>>>74XXX at 193.136.252.5 like I wanted...
>>>>>>
>>>>>>
>>>>>>            
>>>>>>
>>>>>You were on the right way my friend. Why not try
>>>>>
>>>>>exten => _74XXX,1,Dial(SIP/$(EXTEN)@193.136.252.5,30,r)
>>>>>
>>>>>Hope that helps
>>>>>Christian
>>>>>_______________________________________________
>>>>>Asterisk-Users mailing list
>>>>>Asterisk-Users at lists.digium.com
>>>>>http://lists.digium.com/mailman/listinfo/asterisk-users
>>>>>To UNSUBSCRIBE or update options visit:
>>>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>>>>
>>>>>
>>>>>
>>>>>          
>>>>>
>>>>_______________________________________________
>>>>Asterisk-Users mailing list
>>>>Asterisk-Users at lists.digium.com
>>>>http://lists.digium.com/mailman/listinfo/asterisk-users
>>>>To UNSUBSCRIBE or update options visit:
>>>>  http://lists.digium.com/mailman/listinfo/asterisk-users
>>>>
>>>>
>>>>
>>>>        
>>>>
>>>
>>>
>>>      
>>>
>
>
>  
>