[Asterisk-Users] Attended transfer not working (atxfer)

[Damian Minkov]

So here is the output from CLI
All phones are SIP - Cisco 7960, Linksys PAP2-NA, P104S and P160S 
(www.act-tel.com.tw), <http://www.act-tel.com.tw%29,> and few models 
based on PA1688 from different producers.
With all of them it is not working.


The originator is 1002 (Cisco)
The secretary number is 1010
The phone to be connected to is 1007 (Actel).

So the two channels between 1002 and 1007 must be bridged but nothing 
happens. No voice no signal just that beep.

-- Executing Macro("SIP/1002-210f", "dialnumber|1010|SIP/1010")
-- Executing Dial("SIP/1002-210f", "SIP/1010|60|wWtTg") in new stack
-- Called 1010
-- SIP/1010-cb9b is ringing
-- SIP/1010-cb9b answered SIP/1002-210f
-- Attempting native bridge of SIP/1002-210f and SIP/1010-cb9b
-- Attempting native bridge of SIP/1002-210f and SIP/1010-cb9b
-- Attempting native bridge of SIP/1002-210f and SIP/1010-cb9b
-- Started music on hold, class 'default', on SIP/1002-210f
-- Playing 'pbx-transfer' (language 'bg')
-- Executing Macro("Local/1007 at sip-internal-ad39,2", 
"dialnumber_wvm|1007|SIP/1007")
-- Executing Dial("Local/1007 at sip-internal-ad39,2", "SIP/1007|60|wWtTg") 
in new stack
-- Called 1007
-- SIP/1007-3dc2 is ringing
-- SIP/1007-3dc2 answered Local/1007 at sip-internal-ad39,2
-- Stopped music on hold on SIP/1002-210f
-- Playing 'beep' (language 'en')
== Spawn extension (macro-dialnumber, s, 3) exited non-zero on 
'Transfered/SIP/1002-210f<ZOMBIE>' in macro 'dialnumber'
  == Spawn extension (sip-internal, 1010, 1) exited non-zero on 
'Transfered/SIP/1002-210f<ZOMBIE>'
    -- Executing Hangup("Transfered/SIP/1002-210f<ZOMBIE>", "") in new stack
  == Spawn extension (sip-internal, h, 1) exited non-zero on 
'Transfered/SIP/1002-210f<ZOMBIE>'
    -- SIP Seeding peer from astdb: '1007' at 1007 at 10.1.1.32:5060 for 3600
    -- Executing Goto("Local/1007 at sip-internal-ad39,2", "s-ANSWER|1") in 
new stack
    -- Goto (macro-dialnumber_wvm,s-ANSWER,1)
    -- Executing Hangup("Local/1007 at sip-internal-ad39,2", "") in new stack
  == Spawn extension (macro-dialnumber_wvm, s-ANSWER, 1) exited non-zero 
on 'Local/1007 at sip-internal-ad39,2' in macro 'dialnumber_wvm'
  == Spawn extension (sip-internal, 1007, 1) exited non-zero on 
'Local/1007 at sip-internal-ad39,2'
    -- Executing Hangup("Local/1007 at sip-internal-ad39,2", "") in new stack
  == Spawn extension (sip-internal, h, 1) exited non-zero on 
'Local/1007 at sip-internal-ad39,2'




Brian Capouch wrote:

> Damian Minkov wrote:
>
>> Yes I do the same and the user to which I want to tranfer hears the 
>> beep but the channels doesn't get bridged
>>
>
> Nothing showing up amiss on the CLI?
>
> What kinds of phones?  I have only tested with SIP and Zap.
>
> B.
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050728/49725cba/attachment.htm