[Asterisk-Users] Fritz PCI card in ptp mode with chan_misdn

[Craig Guy]

The mISDN Fritz! driver supports PTP mode.  In your startup script where you
load the mISDN drivers call the fritz driver thusly:

    modprobe avmfritz protocol=34

Bit 5 sets PTP mode, bits 3-0 set the D-channel protocol ID (set bit one for
DSS1).

Craig

----- Original Message ----- 
From: "Michiel van Baak" <michiel at vanbaak.info>
To: <asterisk-users at lists.digium.com>
Sent: Wednesday, July 27, 2005 12:35 AM
Subject: Re: [Asterisk-Users] Fritz PCI card in ptp mode with chan_misdn


> On 18:21, Mon 25 Jul 05, Johann Steinwendtner wrote:
> > Hello !
> >
> > I would like to get working a Fritz PCI card using chan_misdn
> > operating in ptp mode.
>
> As far as I know the fritz cards do not support ptp mode.
> We tried all the possible config file options with chan_capi
> and in the end we trashed them and installed a junghanns
> QuadBRI.
>
> If you get it working in ptp mode, please tell me how you
> did it.
> -- 
> Michiel van Baak
> http://michiel.vanbaak.info
> michiel at vanbaak.info
> GnuPG key: http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x7E0B9A2D
>
> "Why is it drug addicts and computer afficionados are both called users?"
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>