[Asterisk-Users] 7960 SIP Firmware Upgrade Strange Problem
Steve Blair
blairs at isc.upenn.edu
Tue Jul 26 09:37:51 MST 2005
There are several postings about this on the web. I don't have the
details handy
anymore but a google search (or search of Cisco's site) should turn up the
answer. I remember seeing this with v7.0 code because of a problem with
the image released from Cisco. If you don't find the answer email me
back and I'll try to dig up what we did.
-Steve
Walid Azab wrote:
> I went from 5.3 to 6.3 then from 6.3 t 7.5 directly. However, I have
> the warning message (Protocol Application Invalid)!!!!
>
> Please any help.
>
> Walid
>
> ------------------------------------------------------------------------
> *From:* asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] *On Behalf Of
> *Watkins, Bradley
> *Sent:* Tuesday, July 26, 2005 4:12 PM
> *To:* 'Asterisk Users Mailing List - Non-Commercial Discussion'
> *Subject:* RE: [Asterisk-Users] 7960 SIP Firmware Upgrade Strange Problem
>
> I believe you have to upgrade to 5.3 in order to go from unsigned to
> signed executables. Once you're at 5.3, you can go directly to 7.5.
> I did this recently with a couple of 7960s I had in the lab and it
> worked perfectly.
>
> Regards,
> - Brad
>
> -----Original Message-----
> *From:* asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] *On Behalf Of
> *Walid Azab
> *Sent:* Tuesday, July 26, 2005 10:29 AM
> *To:* 'Asterisk Users Mailing List - Non-Commercial Discussion'
> *Subject:* [Asterisk-Users] 7960 SIP Firmware Upgrade Strange Problem
>
> Hi,
>
> I am upgrading a Cisco 7960 phone from SIP V.5.1 to 6.0 and then
> will to go up to 7.5
>
> However in my first attempt to go from V.5.1 to 6.0 this is hat
> happens:
>
> - The phone reboots
> - The phone then reads the file OS79XX.TXT from the TFP server. In
> the file I added the version "P0S3-06-0-00"
> - It starts upgrading firmware
> - Then I get the following message: (Upgrade Failed - Unauthorized)
>
> Any ideas? Please find below my conf files.
>
> *SIP.CONF*
> [300]
> username=300
> type=friend
> secret=cisco
> record_out=On-Demand
> record_in=On-Demand
> qualify=no
> port=5060
> nat=never
> mailbox=300 at default <mailto:mailbox=300 at default>
> host=dynamic
> dtmfmode=rfc2833
> context=from-internal
> canreinvite=no
> callerid="" <300>
>
> *SIP000CCE351C07.cnf*
> # SIP Configuration Generic File (start)
>
> # Line 1 Settings
> line1_name: "300" ; Line 1 Extension\User ID
> line1_displayname: "300" ; Line 1 Display Name
> line1_authname: "300" ; Line 1 Registration Authentication
> line1_password: "cisco" ; Line 1 Registration Password
>
> # Line 2 Settings
> line2_name: "" ; Line 2 Extension\User ID
> line2_displayname: "" ; Line 2 Display Name
> line2_authname: "UNPROVISIONED" ; Line 2 Registration
> Authentication
> line2_password: "UNPROVISIONED" ; Line 2 Registration Password
>
> # Line 3 Settings
> line3_name: "" ; Line 3 Extension\User ID
> line3_displayname: "" ; Line 3 Display Name
> line3_authname: "UNPROVISIONED" ; Line 3 Registration
> Authentication
> line3_password: "UNPROVISIONED" ; Line 3 Registration Password
>
> # Line 4 Settings
> line4_name: "" ; Line 4 Extension\User ID
> line4_displayname: "" ; Line 4 Display Name
> line4_authname: "UNPROVISIONED" ; Line 4 Registration
> Authentication
> line4_password: "UNPROVISIONED" ; Line 4 Registration Password
>
> # Line 5 Settings
> line5_name: "" ; Line 5 Extension\User ID
> line5_displayname: "" ; Line 5 Display Name
> line5_authname: "UNPROVISIONED" ; Line 5 Registration
> Authentication
> line5_password: "UNPROVISIONED" ; Line 5 Registration Password
>
> # Line 6 Settings
> line6_name: "" ; Line 6 Extension\User ID
> line6_displayname: "" ; Line 6 Display Name
> line6_authname: "UNPROVISIONED" ; Line 6 Registration
> Authentication
> line6_password: "UNPROVISIONED" ; Line 6 Registration Password
>
> # NAT/Firewall Traversal
> nat_address: ""
> voip_control_port: "5060"
> start_media_port: "16384"
> end_media_port: "32766"
>
>
> # Phone Label (Text desired to be displayed in upper right corner)
> phone_label: "WaZaB-SIP" ; Has no effect on SIP messaging
>
> # Time Zone phone will reside in
> time_zone: EST
>
> # Phone prompt/password for telnet/console session
> phone_prompt: "Cisco7960" ;
> Telnet/Console Prompt
> phone_password: "abc" ; Telnet/Console
> Password
>
> # SIP Configuration Generic File (stop)
> *SIPDefault.cnf*
> # Image Version
> image_version: "P0S3-06-0-00"
>
> # Proxy Server
> proxy1_address: "10.150.200.165"
>
> # Proxy Server Port (default - 5060)
> proxy1_port:"5060"
>
> # Emergency Proxy info
> proxy_emergency: "10.150.200.165"
> proxy_emergency_port: "5060"
>
> # Backup Proxy info
> proxy_backup: "10.150.200.165"
> proxy_backup_port: "5060"
>
> # Outbound Proxy info
> outbound_proxy: ""
> outbound_proxy_port: "5060"
>
> # NAT/Firewall Traversal
> nat_enable: "0"
> nat_address: ""
> voip_control_port: "5061"
> start_media_port: "16384"
> end_media_port: "32766"
> nat_received_processing: "0"
>
> # Proxy Registration (0-disable (default), 1-enable)
> proxy_register: "1"
>
> # Phone Registration Expiration [1-3932100 sec] (Default - 3600)
> timer_register_expires: "3600"
>
> # Codec for media stream (g711ulaw (default), g711alaw, g729)
> preferred_codec: "none"
>
> # TOS bits in media stream [0-5] (Default - 5)
> tos_media: "5"
>
> # Enable VAD (0-disable (default), 1-enable)
> enable_vad: "0"
>
> # Allow for the bridge on a 3way call to join remaining parties
> upon hangup
> cnf_join_enable: "1" ; 0-Disabled, 1-Enabled (default)
>
> # Allow Transfer to be completed while target phone is still ringing
> semi_attended_transfer: "0" ; 0-Disabled, 1-Enabled (default)
>
> # Telnet Level (enable or disable the ability to telnet into this
> phone
> telnet_level: "2" ; 0-Disabled (default), 1-Enabled, 2-Privileged
>
> # Inband DTMF Settings (0-disable, 1-enable (default))
> dtmf_inband: "1"
>
> # Out of band DTMF Settings (none-disable, avt-avt enable
> (default), avt_always - always avt )
> dtmf_outofband: "avt"
>
> # DTMF dB Level Settings (1-6dB down, 2-3db down, 3-nominal
> (default), 4-3db up, 5-6dB up)
> dtmf_db_level: "3"
>
> # SIP Timers
> timer_t1: "500" ; Default 500 msec
> timer_t2: "4000" ; Default 4 sec
> sip_retx: "10" ; Default 11
> sip_invite_retx: "6" ; Default 7
> timer_invite_expires: "180" ; Default 180 sec
>
> # Setting for Message speeddial to UOne box
> messages_uri: "*97"
>
> # TFTP Phone Specific Configuration File Directory
> tftp_cfg_dir: "./"
>
> # Time Server
> sntp_mode: "unicast"
> sntp_server: "10.150.200.165"
> time_zone: "EST"
> dst_offset: "1"
> dst_start_month: "April"
> dst_start_day: ""
> dst_start_day_of_week: "Sun"
> dst_start_week_of_month: "1"
> dst_start_time: "02"
> dst_stop_month: "Oct"
> dst_stop_day: ""
> dst_stop_day_of_week: "Sunday"
> dst_stop_week_of_month: "8"
> dst_stop_time: "2"
> dst_auto_adjust: "1"
>
> # Do Not Disturb Control (0-off, 1-on, 2-off with no user control,
> 3-on with no user control)
> dnd_control: "0" ; Default 0 (Do Not Disturb
> feature is off)
>
> # Caller ID Blocking (0-disabled, 1-enabled, 2-disabled no user
> control, 3-enabled no user control)
> callerid_blocking: "0" ; Default 0 (Disable sending all
> calls as anonymous)
>
> # Anonymous Call Blocking (0-disbaled, 1-enabled, 2-disabled no
> user control, 3-enabled no user control)
> anonymous_call_block: "0" ; Default 0 (Disable blocking of
> anonymous calls)
>
> # Call Waiting (0-disabled, 1-enabled, 2-disabled with no user
> control, 3-enabled with no user control)
> call_waiting: "1" ; Default 1 (Call Waiting enabled)
>
> # DTMF AVT Payload (Dynamic payload range for AVT tones - 96-127)
> dtmf_avt_payload: "101" ; Default 100
>
> # XML file that specifies the dialplan desired
> dial_template: "dialplan"
>
> # Network Media Type (auto, full100, full10, half100, half10)
> network_media_type: "auto"
>
> #Autocompletion During Dial (0-off, 1-on [default])
> autocomplete: "1"
>
> #Time Format (0-12hr, 1-24hr [default])
> time_format_24hr: "0"
>
> # URL for external Phone Services
> services_url: "http://10.150.200.165/cisco/directory/services.php"
>
> # URL for external Directory location
> directory_url: "http://10.150.200.165/cisco/directory/directory.php"
>
> # URL for branding logo
> logo_url: "http://10.150.200.165/cisco/aah.bmp"
>
> # Remote Party ID
> remote_party_id: 1 ; 0-Disabled (default), 1-Enabled
>
>
>
>
>
>
> *The contents of this e-mail are intended for the named addressee
> only. It contains information that may be confidential. Unless you are
> the named addressee or an authorized designee, you may not copy or use
> it, or disclose it to anyone else. If you received it in error please
> notify us immediately and then destroy it.*
>
>
>------------------------------------------------------------------------
>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
--
ISC Network Engineering
The University of Pennsylvania
3401 Walnut Street, Suite 221A
Philadelphia, PA 19104
voice: 215-573-8396
215-746-8001
fax: 215-898-9348
sip:blairs at upenn.edu
More information about the asterisk-users
mailing list