[Asterisk-Users] 100% CPU with Unicall and * head

[Denis Galvão - iSolve]

Hi Jose.

What is the packages version that are you using? What MFCR2 variant  
are you using, I mean, wich country?

Maybe Steve could help us on it. I told him about this problem.

Keep in touch.

Denis.



On 25 de jul de 2005, at 15:36, Jose Chiantera wrote:

> Hi,
>
> I got the same error, when call from IP to digital link using  
> MFCR2, I thinks the problem is a event not managed, If you find a  
> correction for this problem please let me know.
> Maybe the error in the program channel.c, but I am not sure, now I  
> put some traces to try find what kind of event is.
>
> regards
> Jose
>
>
> ----- Original Message ----- From: "Denis Galvão - iSolve"  
> <denis at isolve.com.br>
> To: "Asterisk Users" <asterisk-users at lists.digium.com>
> Sent: Monday, July 25, 2005 9:47 AM
> Subject: [Asterisk-Users] 100% CPU with Unicall and * head
>
>
>
>> Hi all.
>>
>> When I place a call Im getting this error:
>>
>> Jul 25 09:50:07 WARNING[3200] channel.c: Exception flag set on  
>> 'UniCall/13-1', but no exception handler
>>
>> Lots of this messages appeared on my Asterisk full log and the  
>> CPU  got 100%.
>>
>> Topology:
>> Analog Phone - Hicom300H E1 - E1 Asterisk - IP Trunk
>>
>> Problem:
>> 1. Calls from Analog Phone through Asterisk is ok, but the  
>> messages appeared.
>> 2. Calls from IP Trunk to Analog Phone is not ok andd the messages  
>> appeared too.
>>
>> System:
>> Fedora Core 2 - Asterisk CVS HEAD(last week) - unicall-0.0.3pre3 -  
>> spandsp-0.0.2pre18
>>
>> ----unicall.conf----
>> [channels]
>> language=br
>> context=from-internal
>> usecallerid=yes
>> hidecallerid=no
>> immediate=no
>> callwaitingcallerid=yes
>> threewaycalling=yes
>> transfer=yes
>> cancallforward=yes
>> callreturn=yes
>> echocancel=yes
>> echocancelwhenbridged=yes
>> rxgain=0.0
>> txgain=0.0
>> loglevel=255
>>
>> protocolclass=mfcr2
>> protocolvariant=br,10,13
>> protocolend=co
>> group=1
>> callerid=asreceived
>> channel=>1-15
>> channel=>17-31
>> ------------------
>>
>> ----zaptel.conf----
>> loadzone = us
>> defaultzone=us
>> span=1,0,0,cas,hdb3
>> cas=1-15:1101
>> cas=17-31:1101
>> ------------------
>>
>> Thanks.
>>
>> Denis Galvão
>>
>>
>>
>>
>>
>> _______________________________________________
>> Asterisk-Users mailing list
>> Asterisk-Users at lists.digium.com
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>