[Asterisk-Users] Running Asterisk on a Dell PowerEdge 2850 Server Re: Dell Hardware

[Kristian Kielhofner]

M O wrote:
> Hello,
> 
> 
> Just chiming in here:
> 
> 
>>From: asterisk-users-bounces at lists.digium.com
>>[mailto:asterisk-users-bounces at lists.digium.com] On
>>Behalf Of
>>bdolljr at bigskytech.com
>>Sent: Viernes, 22 de Julio de 2005 01:24 p.m.
>>To: Asterisk Users Mailing List - Non-Commercial
>>Discussion
>>Subject: RE: [Asterisk-Users] Dell Hardware
> 
> 
>>>Mmhh nice !! So, why did Digium forbid it :)? 
> 
> 
>>If Dell is so bad... why is a Dell 2850 server one of
>>the two listed on the compatibility list for ABE? 
>>http://www.digium.com/index.php?menu=product_detail&category=software&produc
>>t=ABE&tab=compatibility 
> 
> 
> I am running Asterisk on a 100Mbps Pipe on the
> following: 
> 
> Hardware Information
> Processors	4 <-(should be 2)
> Model	Intel(R) Xeon(TM) CPU 3.00GHz
> Chip MHz	2992.81 MHz
> Cache Size	1024 KB
> System Bogomips	23907.52
> PCI Devices	00:1f.1 IDE interface: Intel Corp.
> 82801EB/ER
> 02:0e.0 RAID bus controller: Dell PowerEdge Expandable
> RAID controller 4
> 06:07.0 Ethernet controller: Intel Corp. 82541GI/PI
> Gigabit Ethernet Controller
> 07:08.0 Ethernet controller: Intel Corp. 82541GI/PI
> Gigabit Ethernet Controller
> 0b:0d.0 VGA compatible controller: ATI Technologies
> Inc Radeon RV100 QY [Radeon 7000/VE]
> IDE Devices	hda: TEAC CD-ROM CD-224E
> SCSI Devices	MegaRAID LD 0 RAID0 69G (Direct-Access)
> PE/PV 1x6 SCSI BP (Processor)
> USB Devices	Linux 2.4.21-27.0.1.ELsmp ehci-hcd Intel
> Corp. 82801EB USB2 00:1d.7
> USB UHCI Root Hub bca0
> USB UHCI Root Hub bcc0
> 
> Sincerely,
> 
> Martin 

I'm doing just fine on the exact same hardware with RHEL 4 and CVS-HEAD.

--
Kristian Kielhofner