[Asterisk-Users] X100P not answering

[Carlos Chavez]

On Sat, 23 Jul 2005 13:21:56 +0300, Tzafrir Cohen wrote
> On Fri, Jul 22, 2005 at 05:39:43PM -0500, Carlos Chavez wrote:
> > 	I have an Asterisk server running todays CVS (updated it just in case
> > that was the problem).  It has 3 X100P cards.  The first two lines I use
> > as my normal work lines and the third is my fax line which I use with
> > SpanDSP.  I run Fedora Core 4.
> 
> Interested to know how this works. There seem to be quite a few problems
> for spandsp through a TDM card, right?
> 
     I have used SpanDSP for the last 5 months with about 98% success at
receiving faxes.  To avoid sqashed TIFF files I convert them to PDF before
emailing them.  I do not use SpanDSP for sending, I prefer efax for that.

> > 
> > 	I have a problem that the third X100P does not answer the call.  From
> > the console I can see that there is an incoming call with the following:
> > 
> >     -- Starting simple switch on 'Zap/3-1'
> > Jul 22 17:34:21 ERROR[30490]: callerid.c:266 callerid_feed: fsk_serie
> > made mylen < 0 (-16)
> > Jul 22 17:34:21 WARNING[30490]: chan_zap.c:5827 ss_thread: CallerID feed
> > failed: Success
> > Jul 22 17:34:21 WARNING[30490]: chan_zap.c:5871 ss_thread: CallerID
> > returned with error on channel 'Zap/3-1'
> 
> Any chance that this is the same issue as the UK caller ID issue? I seem
> to recall that the same problem applies to Mexican phone lines as well.

     No, actually my fax line does not have Caller ID activated.  CallerID
works like a charm in Mexico as we use basically the same system as the USA.

> 
> >     -- Executing Wait("Zap/3-1", "1") in new stack
> >     -- Executing Answer("Zap/3-1", "") in new stack
> >     -- Executing ResponseTimeout("Zap/3-1", "5") in new stack
> >     -- Set Response Timeout to 5
> >     -- Executing SetLanguage("Zap/3-1", "es") in new stack
> >     -- Executing AbsoluteTimeout("Zap/3-1", "600") in new stack
> >     -- Set Absolute Timeout to 600
> >     -- Executing BackGround("Zap/3-1", "bien-fax") in new stack
> >     -- Playing 'bien-fax' (language 'es')
> > Jul 22 17:34:25 WARNING[30490]: chan_zap.c:3696 zt_handle_event:
> > Ring/Off-hook in strange state 6 on channel 3
> >   == Spawn extension (fax, s, 6) exited non-zero on 'Zap/3-1'
> >     -- Hungup 'Zap/3-1'
> > 
> > 	The calling phone just keeps ringing all the time and the messages
> > above are repeated until I hangup the call.  My other two lines work
> > perfectly.  Any ideas?
> 
> Need an Answer in the dialplan?
> 
     The second comand after Wait is Answer.  I do not really need the wait as
this line does not have caller ID, but I left it there anyway.


--
Carlos Chavez
Director de Tecnología
Telecomunicaciones Abiertas de México S.A. de C.V.
Tel: +52-55-91169161 Ext 2001