R: [Asterisk-Users] Quadbri trouble

[Yousef Herzallah]

I got the same problem, and what i  change it was point-to-point to point-to-multi-point, and I used normal patch cable to connect the ISDN card to ISDN connector, and I used TE mode. 
In italy work like that 
I hope that will help you,
I used also bristuff. 
 
Good luck
 
________________________________

Da: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] Per conto di tonini.massimo at tiscali.it
Inviato: martedì 19 luglio 2005 16.23
A: asterisk-users at lists.digium.com
Oggetto: [Asterisk-Users] Quadbri trouble
 

Hi, 
I'm trying to configure a quadbri card using the configuration found in Bristuff. 
I know the configuration of telco is point-to-point and I think the card have to work in NT mode (I presume because I have 
not found the documentation about this and when attach to the ISDN the led become green). 
I'm not able to make and receive call. When I receive a call nothing happen in the asterisk cli and from the caller I receive 
a connection error. 
When I try to make a call I receive "unable to create zap channel" 
THis is my configuration: 

Zapata.conf 
switchtype = euroisdn 
signalling = bri_net 

pridialplan = local 
prilocaldialplan = local 
nationalprefix = 0 
internationalprefix = 00 

echocancel = yes 

context=default 
group = 1 
; S/T port 1 
channel => 1-2 
signalling = bri_net 
group = 2 
; S/T port 2 
channel => 4-5 
signalling = bri_net 
group = 3 
; S/T port 3 
channel => 7-8 
signalling = bri_net 
group = 4 
; S/T port 4 
channel => 10-11 
signalling = bri_net 

Zaptel.conf 

loadzone=it 
defaultzone=it 
span=1,1,3,ccs,ami 
span=2,0,3,ccs,ami 
span=3,0,3,ccs,ami 
span=4,0,3,ccs,ami 

bchan=1,2 
dchan=3 
bchan=4,5 
dchan=6 
bchan=7,8 
dchan=9 
bchan=10,11 
dchan=12 

Bye
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050722/22ba36ad/attachment.htm