[Asterisk-Users] Sip problems

[Steve Maroney]

I haven't been following this post, but yes, you need to remove those
semicolons and use multiple allow= lines following a disallow=all

Thank you,
Steve Maroney

On Thu, 21 Jul 2005 asterisk at txpe.net wrote:

> Ok, I'm pretty much a Linux newb and I don't know if this has anything to
> do with your problem, but in your "allow=" lines, you use a semi-colon (;)
> to separate your list.  I thought the semi-colon noted a
> comment.  Therefore, everything after the semi-colon would be ignored.  In
> your case, the only allowed codec is g729.   Sorry if I am wrong.
>
>
> At 10:36 PM 7/21/2005, you wrote:
> >Hi,
> >
> >I have been trying to configure one Asterisk to use a Sip provider.
> >
> >My sip.conf is:
> >
> >register => user:passwd at www.xxx.yyy.zzz
> >
> >[www.xxx.yyy.zzz]
> >type=friend
> >secret=passwd
> >username=user
> >host=www.xxx.yyy.zzz
> >insecure=very
> >disallow=all
> >allow=g729;gsm;ulaw;alaw
> >reinvite=no
> >
> >[sipphone]
> >;dtmfmode=info
> >host=dynamic
> >language=es
> >nat=yes
> >secret=mysecret
> >type=friend
> >username=sipphone
> >allow=g729;ilbc;gsm;ulaw;alaw
> >regseconds=0
> >cancallforward=yes
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>