[Asterisk-Users] Junghanns quadBRI on Dell PowerEdge

[David Hajek]

My zaptel.conf:

[channels]
switchtype = euroisdn
; BRI CARD
nationalprefix = 0
internationalprefix = 00
signalling = bri_cpe
pridialplan = local
prilocaldialplan = local
echocancel = yes
rxgain=-2
txgain=4
echotraining=yes
context=from-isdn
usecallerid=yes
hidecallerid=no
group = 1
channel => 1,2,4,5,7,8,10,11

Yes, quadBRI does not share any interrupts.

Do you use this card in Dell PE 2800? I suspect that this card can't 
work in 64-bit PCI slots?

Thanks,
David


David Hajek wrote:

>> We get  "CRC errors for HDLC frame" when the card is initialized. Any 
>> idea what can be wrong?
>> After loading the driver we got CRC errors like this:
>> Jul 19 17:02:30 ustredna kernel: qozap: CRC error for HDLC frame on 
>> card 1 (cardID 0) S/T port 1
>
>
> What are your settings in /etc/zaptel.conf ?

| I once had the same issue, make sure your signalling is:

> signalling = bri_cpe
>
> Also, check with "# cat /proc/interrupts" that the quadBRI is not 
> sharing an irq with something else.
>
>
>> Jul 19 17:15:55 ustredna kernel: qozap: S/T ports: 4 [ TE TE TE TE ]
>> Jul 19 17:15:55 ustredna kernel: qozap: 1 multiBRI card(s) in this 
>> box, 4 BRI ports total.
>
>
> Your card is found, so hardware seems to be okay..
>
> Best regards,
>
> Kristof.
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users