[Asterisk-Users] Junghanns quadBRI on Dell PowerEdge

[David Hajek]

Exactly.

Junghanns works for me on old PIII system, but it does not work in 
newest Dell PE.


-
David Hajek
IT/IS Manager
Systinet Corporation
Phone: +420 2 7201 9526
Cell: +420 604 352 968
hajek at systinet.com
http://www.systinet.com



Altus Snyman wrote:

>
>
> The 1ste pc I tried it on was on a expensive intel board and the 
> second one that worked was on some cheap name board
> Ill say incompatibility ?
>
>> Yes, I do use latest bri-stuff package (asterisk 1.0.9 incl)
>>
>> Any ideas?
>>
>> -
>> David Hajek
>> IT/IS Manager
>> Systinet Corporation
>> Phone: +420 2 7201 9526
>> Cell: +420 604 352 968
>> hajek at systinet.com
>> http://www.systinet.com
>>
>>
>>
>> altus wrote:
>>
>>> I had the same problems with a 4 port junghanns and a 4 por wcfxs I 
>>> took the junghanns out and added it into a new box and all was ok
>>> So ether it was because the 2 cards was in together or it was the
>>> motherboard?
>>> U using the latest driver and asterisk?
>>>
>>> On Wed, 2005-07-20 at 11:31 +0200, David Hajek wrote:
>>>  
>>>
>>>> Hi,
>>>>
>>>> we are trying to install Junghann's quadBRI into Dell PowerEdge 
>>>> 2800 system without success.
>>>> I don't know if the issue can be that Junghann's card fits 32-bit 
>>>> slot and Dell PE 2800 has
>>>> only 3 PCI-X 64-bit slots. Can this be an issue?
>>>>
>>>> We get  "CRC errors for HDLC frame" when the card is initialized. 
>>>> Any idea what can be wrong?
>>>>
>>>> 1/ We use latest bristuff packages.
>>>> 2/ We use TE mode
>>>> 3/ Card is working on older 2.4 system, we use same cables and ISDN 
>>>> devices.
>>>> 4/ On Dell we have a Centos 4.1 with 2.6.12 kernel.
>>>>
>>>> After loading the driver we got CRC errors like this:
>>>>
>>>> Jul 19 17:02:30 ustredna kernel: qozap: CRC error for HDLC frame on 
>>>> card 1 (cardID 0) S/T port 1
>>>> Jul 19 17:02:30 ustredna kernel: qozap: CRC error for HDLC frame on 
>>>> card 1 (cardID 0) S/T port 2
>>>> Jul 19 17:02:30 ustredna kernel: qozap: CRC error for HDLC frame on 
>>>> card 1 (cardID 0) S/T port 3
>>>> Jul 19 17:02:30 ustredna kernel: qozap: CRC error for HDLC frame on 
>>>> card 1 (cardID 0) S/T port 4
>>>> Jul 19 17:02:30 ustredna kernel: qozap: CRC error for HDLC frame on 
>>>> card 1 (cardID 0) S/T port 1
>>>> Jul 19 17:02:30 ustredna kernel: qozap: CRC error for HDLC frame on 
>>>> card 1 (cardID 0) S/T port 2
>>>> Jul 19 17:02:30 ustredna kernel: qozap: CRC error for HDLC frame on 
>>>> card 1 (cardID 0) S/T port 3
>>>> Jul 19 17:02:30 ustredna kernel: qozap: CRC error for HDLC frame on 
>>>> card 1 (cardID 0) S/T port 4
>>>> Jul 19 17:02:30 ustredna kernel: qozap: CRC error for HDLC frame on 
>>>> card 1 (cardID 0) S/T port 1
>>>> Jul 19 17:02:30 ustredna kernel: qozap: CRC error for HDLC frame on 
>>>> card 1 (cardID 0) S/T port 3
>>>> Jul 19 17:02:30 ustredna kernel: qozap: CRC error for HDLC frame on 
>>>> card 1 (cardID 0) S/T port 4
>>>>
>>>>
>>>> Loading qozap driver:
>>>> Jul 19 17:15:55 ustredna kernel: qozap: no version for "zt_receive" 
>>>> found: kernel tainted.
>>>> Jul 19 17:15:55 ustredna kernel: qozap: Junghanns.NET quadBRI card 
>>>> configured at mem 0xf8836000 IRQ 77 HZ 1000
>>>> CardID 0
>>>> Jul 19 17:15:55 ustredna kernel: qozap: S/T ports: 4 [ TE TE TE TE ]
>>>> Jul 19 17:15:55 ustredna kernel: qozap: 1 multiBRI card(s) in this 
>>>> box, 4 BRI ports total.
>>>>
>>>> Running ztcfg:
>>>> Jul 19 17:15:56 ustredna ztcfg:
>>>> Jul 19 17:15:56 ustredna ztcfg: SPAN 1: CCS/ AMI Build-out: 399-533 
>>>> feet (DSX-1)
>>>> Jul 19 17:15:56 ustredna ztcfg: SPAN 2: CCS/ AMI Build-out: 399-533 
>>>> feet (DSX-1)
>>>> Jul 19 17:15:56 ustredna ztcfg: SPAN 3: CCS/ AMI Build-out: 399-533 
>>>> feet (DSX-1)
>>>> Jul 19 17:15:56 ustredna ztcfg: SPAN 4: CCS/ AMI Build-out: 399-533 
>>>> feet (DSX-1)
>>>> Jul 19 17:15:56 ustredna ztcfg:
>>>> Jul 19 17:15:56 ustredna ztcfg: Channel map:
>>>> Jul 19 17:15:56 ustredna ztcfg:
>>>> Jul 19 17:15:56 ustredna ztcfg: Channel 01: Individual Clear 
>>>> channel (Default) (Slaves: 01)
>>>> Jul 19 17:15:56 ustredna ztcfg: Channel 02: Individual Clear 
>>>> channel (Default) (Slaves: 02)
>>>> Jul 19 17:15:56 ustredna ztcfg: Channel 03: D-channel (Default) 
>>>> (Slaves: 03)
>>>> Jul 19 17:15:56 ustredna ztcfg: Channel 04: Individual Clear 
>>>> channel (Default) (Slaves: 04)
>>>> Jul 19 17:15:56 ustredna ztcfg: Channel 05: Individual Clear 
>>>> channel (Default) (Slaves: 05)
>>>> Jul 19 17:15:56 ustredna ztcfg: Channel 06: D-channel (Default) 
>>>> (Slaves: 06)
>>>> Jul 19 17:15:56 ustredna ztcfg: Channel 07: Individual Clear 
>>>> channel (Default) (Slaves: 07)
>>>> Jul 19 17:15:56 ustredna ztcfg: Channel 08: Individual Clear 
>>>> channel (Default) (Slaves: 08)
>>>> Jul 19 17:15:56 ustredna ztcfg: Channel 09: D-channel (Default) 
>>>> (Slaves: 09)
>>>> Jul 19 17:15:56 ustredna ztcfg: Channel 10: Individual Clear 
>>>> channel (Default) (Slaves: 10)
>>>> Jul 19 17:15:56 ustredna ztcfg: Channel 11: Individual Clear 
>>>> channel (Default) (Slaves: 11)
>>>> Jul 19 17:15:56 ustredna ztcfg: Channel 12: D-channel (Default) 
>>>> (Slaves: 12)
>>>> Jul 19 17:15:56 ustredna ztcfg:
>>>> Jul 19 17:15:56 ustredna ztcfg: 12 channels configured.
>>>> Jul 19 17:15:56 ustredna ztcfg:
>>>> Jul 19 17:15:56 ustredna zaptel: Running ztcfg:  succeeded
>>>>
>>>> Thank you,
>>>>
>>>> -- 
>>>> -
>>>> David Hajek
>>>> IT/IS Manager
>>>> Systinet Corporation
>>>> Phone: +420 2 7201 9526
>>>> Cell: +420 604 352 968
>>>> hajek at systinet.com
>>>> http://www.systinet.com
>>>>
>>>> _______________________________________________
>>>> Asterisk-Users mailing list
>>>> Asterisk-Users at lists.digium.com
>>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>>> To UNSUBSCRIBE or update options visit:
>>>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>>>
>>>>   
>>>
>>>
>>
>>
>