[Asterisk-Users] Polycom IP600 - Worth the extra $$

[dbruce]

The IP300 will run SIP v1.5.2, as will the IP500 and IP600. I have tested
them with bootrom v1.6.2

The issue is not that the IP300 and IP500 phones do not have enough memory
to run SIP v1.5.2, it is that they do not have enough memory to run bootrom
v3.x.x AND sip v1.5.2. The added features of the new bootrom have caused it
to bloat, requiring the increase of memory in the IP301 and IP501.

But... as long as you do not need any of the enhanced features offered by
bootrom v3.x.x (HTTPS/FTPS), stick with bootrom v2.6.2, and you will be able
to use the new features of sip v1.5.2.

regards,
Derek


----- Original Message -----
From: "Adam Goryachev" <mailinglists at websitemanagers.com.au>
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<asterisk-users at lists.digium.com>
Sent: Monday, July 18, 2005 10:18 PM
Subject: Re: [Asterisk-Users] Polycom IP600 - Worth the extra $$


> On Mon, 2005-07-18 at 23:04 -0500, Kristian Kielhofner wrote:
> > The new firmware and bootrom already require 4mb flash, which the 301,
> > 501, and 600 have.  You can't load firmware 1.5.2 on the 300 or 500!
>
> Are you sure of that?? I don't recall seeing that noted anywhere... and
> I'm sure I've put 1.5.2 onto IP300 phones....
>
> Anybody know for sure if it works ??
>
> Regards,
> Adam
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users