[Asterisk-Users] Strange problem with SIP and CAPI
Cyrille Demaret
cyrille at easynet.be
Fri Jul 15 02:12:51 MST 2005
Hi,
I’ve strange problem when I’m making a call from SIP (Cisco 7960) to capi
(Fritz PCI). When I call a national number, I’m hearing the ringtone when
the called party is ringing but when I call an international number, I don’t
hear the ringtone and I’ve a silence until the called party answers. Both
call are going through the same extension.
Here’s 2 log files, one with a national number and one with an
international.
National :
----------------------------------------------------------------------------
---------------------------------------------------
-- Executing Dial("SIP/200-837b", "CAPI/010xxxxxx:b0478xxxxxx|30") in
new stack
-- data = 010xxxxxx:b0478xxxxxx
-- capi request omsn = 010xxxxxx
== found capi with omsn = 010xxxxxx
== CAPI Call CAPI[contr1/010xxxxxx]/80 with B3 -- creating pipe for
PLCI=-1
-- CONNECT_CONF ID=003 #0x0844 LEN=0014
Controller/PLCI/NCCI = 0x101
Info = 0x0
-- CONNECT_CONF ID=003 #0x0844 LEN=0014
Controller/PLCI/NCCI = 0x101
Info = 0x0
== received CONNECT_CONF PLCI = 0x101 INFO = 0
> sent CONNECT_REQ MN =0x844
-- Called 010xxxxxx:b0478xxxxxx
-- INFO_IND ID=003 #0x811c LEN=0015
Controller/PLCI/NCCI = 0x101
InfoNumber = 0x8002
InfoElement = default
-- INFO_IND ID=003 #0x811c LEN=0015
Controller/PLCI/NCCI = 0x101
InfoNumber = 0x8002
InfoElement = default
> sent INFO_RESP (PLCI=0x101)
-- INFO_IND ID=003 #0x811d LEN=0016
Controller/PLCI/NCCI = 0x101
InfoNumber = 0x18
InfoElement = <89>
-- INFO_IND ID=003 #0x811d LEN=0016
Controller/PLCI/NCCI = 0x101
InfoNumber = 0x18
InfoElement = <89>
> sent INFO_RESP (PLCI=0x101)
-- INFO_IND ID=003 #0x811e LEN=0015
Controller/PLCI/NCCI = 0x101
InfoNumber = 0x8001
InfoElement = default
-- INFO_IND ID=003 #0x811e LEN=0015
Controller/PLCI/NCCI = 0x101
InfoNumber = 0x8001
InfoElement = default
> sent INFO_RESP (PLCI=0x101)
-- CAPI[contr1/010xxxxxx]/80 is ringing
<-------------------- I hear the ringtone here
-- INFO_IND ID=003 #0x811f LEN=0020
Controller/PLCI/NCCI = 0x101
InfoNumber = 0x29
InfoElement = <05 07 0f 0a>6
-- INFO_IND ID=003 #0x811f LEN=0020
Controller/PLCI/NCCI = 0x101
InfoNumber = 0x29
InfoElement = <05 07 0f 0a>6
> sent INFO_RESP (PLCI=0x101)
-- CONNECT_ACTIVE_IND ID=003 #0x8120 LEN=0028
Controller/PLCI/NCCI = 0x101
ConnectedNumber = <11 83>32478540441
ConnectedSubaddress = default
LLC = default
-- CONNECT_ACTIVE_IND ID=003 #0x8120 LEN=0028
Controller/PLCI/NCCI = 0x101
ConnectedNumber = <11 83>32478540441
ConnectedSubaddress = default
LLC = default
> sent CONNECT_ACTIVE_RESP (PLCI=0x101)
-- sent CONNECT_B3_REQ (PLCI=0x101)
-- CONNECT_B3_CONF ID=003 #0x0845 LEN=0014
Controller/PLCI/NCCI = 0x10101
Info = 0x0
-- CONNECT_B3_CONF ID=003 #0x0845 LEN=0014
Controller/PLCI/NCCI = 0x10101
Info = 0x0
-- CONNECT_B3_ACTIVE_IND ID=003 #0x8121 LEN=0013
Controller/PLCI/NCCI = 0x10101
NCPI = default
-- CONNECT_B3_ACTIVE_IND ID=003 #0x8121 LEN=0013
Controller/PLCI/NCCI = 0x10101
NCPI = default
> sent CONNECT_B3_ACTIVE_RESP (NCCI=0x10101)
-- CAPI[contr1/010xxxxxx]/80 answered SIP/200-837b
-- DATA_B3_IND ID=003 #0x8122 LEN=0030
Controller/PLCI/NCCI = 0x10101
Data32 = 0xb79f39fe
DataLength = 0xa0
DataHandle = 0x0
Flags = 0x0
Data64 = 0x0
.............
> sent DATA_B3_RESP (NCCI=0x10101)
-- DATA_B3_IND ID=003 #0x8143 LEN=0030
Controller/PLCI/NCCI = 0x10101
Data32 = 0xb79f39fe
DataLength = 0xa0
DataHandle = 0x1
Flags = 0x0
Data64 = 0x0
> sent DATA_B3_RESP (NCCI=0x10101)
-- DATA_B3_CONF ID=003 #0x0861 LEN=0016
Controller/PLCI/NCCI = 0x10101
DataHandle = 0x6fe
Info = 0x0
-- DATA_B3_CONF ID=003 #0x0861 LEN=0016
Controller/PLCI/NCCI = 0x10101
DataHandle = 0x6fe
Info = 0x0
-- DATA_B3_IND ID=003 #0x8144 LEN=0030
Controller/PLCI/NCCI = 0x10101
Data32 = 0xb79f39fe
DataLength = 0xa0
DataHandle = 0x0
Flags = 0x0
Data64 = 0x0
> sent DATA_B3_RESP (NCCI=0x10101)
-- CAPI Hangingup
> activehangingup
> sent DISCONNECT_B3_REQ NCCI=0x10101
-- DISCONNECT_B3_CONF ID=003 #0x0862 LEN=0014
Controller/PLCI/NCCI = 0x10101
Info = 0x0
-- DISCONNECT_B3_CONF ID=003 #0x0862 LEN=0014
Controller/PLCI/NCCI = 0x10101
Info = 0x0
-- DISCONNECT_B3_IND ID=003 #0x8145 LEN=0015
Controller/PLCI/NCCI = 0x10101
Reason_B3 = 0x0
NCPI = default
== DISCONNECT_B3_IND NCCI=0x10101
> sent DISCONNECT_B3_RESP NCCI=0x10101
> sent DISCONNECT_REQ PLCI=0x101
-- DISCONNECT_CONF ID=003 #0x0863 LEN=0014
Controller/PLCI/NCCI = 0x101
Info = 0x0
-- DISCONNECT_CONF ID=003 #0x0863 LEN=0014
Controller/PLCI/NCCI = 0x101
Info = 0x0
-- DISCONNECT_IND ID=003 #0x8146 LEN=0014
Controller/PLCI/NCCI = 0x101
Reason = 0x3400
== DISCONNECT_IND PLCI=0x101 REASON=0x3400
> sent DISCONNECT_RESP PLCI=0x101
-- removed pipe for PLCI = 0x101
== Spawn extension (intern, 00478xxxxxx, 1) exited non-zero on
'SIP/200-837b'
----------------------------------------------------------------------------
---------------------------------------------------
International :
----------------------------------------------------------------------------
---------------------------------------------------
-- Executing Dial("SIP/200-2cd7", "CAPI/010xxxxxx:b0033xxxxxxxxx|30") in
new stack
-- data = 010xxxxxx:b0033xxxxxxxxx
-- capi request omsn = 010xxxxxx
== found capi with omsn = 010xxxxxx
== CAPI Call CAPI[contr1/010xxxxxx]/79 with B3 -- creating pipe for
PLCI=-1
-- CONNECT_CONF ID=003 #0x07d3 LEN=0014
Controller/PLCI/NCCI = 0x101
Info = 0x0
-- CONNECT_CONF ID=003 #0x07d3 LEN=0014
Controller/PLCI/NCCI = 0x101
Info = 0x0
== received CONNECT_CONF PLCI = 0x101 INFO = 0
> sent CONNECT_REQ MN =0x7d3
-- Called 010xxxxxx:b0033xxxxxxxxx
-- INFO_IND ID=003 #0x80a1 LEN=0015
Controller/PLCI/NCCI = 0x101
InfoNumber = 0x800d
InfoElement = default
-- INFO_IND ID=003 #0x80a1 LEN=0015
Controller/PLCI/NCCI = 0x101
InfoNumber = 0x800d
InfoElement = default
> sent INFO_RESP (PLCI=0x101)
-- INFO_IND ID=003 #0x80a2 LEN=0016
Controller/PLCI/NCCI = 0x101
InfoNumber = 0x18
InfoElement = <89>
-- INFO_IND ID=003 #0x80a2 LEN=0016
Controller/PLCI/NCCI = 0x101
InfoNumber = 0x18
InfoElement = <89>
> sent INFO_RESP (PLCI=0x101)
-- CAPI[contr1/010xxxxxx]/79 is making progress passing it to
SIP/200-2cd7
-- INFO_IND ID=003 #0x80a3 LEN=0015
Controller/PLCI/NCCI = 0x101
InfoNumber = 0x8002
InfoElement = default
-- INFO_IND ID=003 #0x80a3 LEN=0015
Controller/PLCI/NCCI = 0x101
InfoNumber = 0x8002
InfoElement = default
> sent INFO_RESP (PLCI=0x101)
-- INFO_IND ID=003 #0x80a4 LEN=0015
Controller/PLCI/NCCI = 0x101
InfoNumber = 0x8001
InfoElement = default
-- INFO_IND ID=003 #0x80a4 LEN=0015
Controller/PLCI/NCCI = 0x101
InfoNumber = 0x8001
InfoElement = default
> sent INFO_RESP (PLCI=0x101)
-- CAPI[contr1/010xxxxxx]/79 is ringing
<------------------ Nothing here
-- INFO_IND ID=003 #0x80a5 LEN=0020
Controller/PLCI/NCCI = 0x101
InfoNumber = 0x29
InfoElement = <05 07 0f 0a>6
-- INFO_IND ID=003 #0x80a5 LEN=0020
Controller/PLCI/NCCI = 0x101
InfoNumber = 0x29
InfoElement = <05 07 0f 0a>6
> sent INFO_RESP (PLCI=0x101)
-- CONNECT_ACTIVE_IND ID=003 #0x80a6 LEN=0017
Controller/PLCI/NCCI = 0x101
ConnectedNumber = <00 c3>
ConnectedSubaddress = default
LLC = default
-- CONNECT_ACTIVE_IND ID=003 #0x80a6 LEN=0017
Controller/PLCI/NCCI = 0x101
ConnectedNumber = <00 c3>
ConnectedSubaddress = default
LLC = default
> sent CONNECT_ACTIVE_RESP (PLCI=0x101)
-- sent CONNECT_B3_REQ (PLCI=0x101)
-- CONNECT_B3_CONF ID=003 #0x07d4 LEN=0014
Controller/PLCI/NCCI = 0x10101
Info = 0x0
-- CONNECT_B3_CONF ID=003 #0x07d4 LEN=0014
Controller/PLCI/NCCI = 0x10101
Info = 0x0
-- CONNECT_B3_ACTIVE_IND ID=003 #0x80a7 LEN=0013
Controller/PLCI/NCCI = 0x10101
NCPI = default
-- CONNECT_B3_ACTIVE_IND ID=003 #0x80a7 LEN=0013
Controller/PLCI/NCCI = 0x10101
NCPI = default
> sent CONNECT_B3_ACTIVE_RESP (NCCI=0x10101)
-- CAPI[contr1/010xxxxxx]/79 answered SIP/200-2cd7
-- DATA_B3_IND ID=003 #0x80a8 LEN=0030
Controller/PLCI/NCCI = 0x10101
Data32 = 0xb79f39fe
DataLength = 0xa0
DataHandle = 0x0
Flags = 0x0
Data64 = 0x0
> sent DATA_B3_RESP (NCCI=0x10101)
> sent DATA_B3_REQ (NCCI=0x10101) (160 bytes)
-- DATA_B3_IND ID=003 #0x80a9 LEN=0030
Controller/PLCI/NCCI = 0x10101
Data32 = 0xb79f39fe
DataLength = 0xa0
DataHandle = 0x1
Flags = 0x0
Data64 = 0x0
> sent DATA_B3_RESP (NCCI=0x10101)
.............
> sent DATA_B3_RESP (NCCI=0x10101)
-- DATA_B3_IND ID=003 #0x8119 LEN=0030
Controller/PLCI/NCCI = 0x10101
Data32 = 0xb79f39fe
DataLength = 0xa0
DataHandle = 0x1
Flags = 0x0
Data64 = 0x0
> sent DATA_B3_RESP (NCCI=0x10101)
-- CAPI Hangingup
> activehangingup
> sent DISCONNECT_B3_REQ NCCI=0x10101
-- DISCONNECT_B3_CONF ID=003 #0x0842 LEN=0014
Controller/PLCI/NCCI = 0x10101
Info = 0x0
-- DISCONNECT_B3_CONF ID=003 #0x0842 LEN=0014
Controller/PLCI/NCCI = 0x10101
Info = 0x0
-- DISCONNECT_B3_IND ID=003 #0x811a LEN=0015
Controller/PLCI/NCCI = 0x10101
Reason_B3 = 0x0
NCPI = default
== DISCONNECT_B3_IND NCCI=0x10101
> sent DISCONNECT_B3_RESP NCCI=0x10101
> sent DISCONNECT_REQ PLCI=0x101
-- DISCONNECT_CONF ID=003 #0x0843 LEN=0014
Controller/PLCI/NCCI = 0x101
Info = 0x0
-- DISCONNECT_CONF ID=003 #0x0843 LEN=0014
Controller/PLCI/NCCI = 0x101
Info = 0x0
-- DISCONNECT_IND ID=003 #0x811b LEN=0014
Controller/PLCI/NCCI = 0x101
Reason = 0x3400
== DISCONNECT_IND PLCI=0x101 REASON=0x3400
> sent DISCONNECT_RESP PLCI=0x101
-- removed pipe for PLCI = 0x101
== Spawn extension (intern, 00033xxxxxxxxx, 1) exited non-zero on
'SIP/200-2cd7'
----------------------------------------------------------------------------
---------------------------------------------------
Does anyone have an idea about what's wrong?
Thank you,
Regards,
Cyrille
More information about the asterisk-users
mailing list