[Asterisk-Users] Asterisk+errision PBX

[Shahan Kalutanthri]

Dear All,

I have a setup where three errision PBX's (head office & 2 branch offices )
are @ three different location. Head of has a errision BP250 where the
branch officers has Errision BP50's.

I wana connect all three PBX's through IP link's. My idea is to connect
BP250 ( head office ) to asterisk. This has to be done using analog
interfacing coz there is no E1 / or T1 card's on BP250 and cost is also a
concern.

Can this be done ? And what kind of analog interfaces I should use ?

For branch office sides ( Errision BP 50 ), is it possible to use some FXS
interface ( ex : Cisco ATA  etc ) and connect that directly to the Errision
BP 50, where the other end ( ex. Cisco ATA  IP side ) connected to the
Asterisk @ Head office ?


Thanks
Shahan












 



This e-mail may contain confidential and/or privileged information.
If you are not the intended recipient or have received this e-mail in error,
please notify the sender immediately and destroy this e-mail. Any
unauthorised copying, disclosure or distribution of the material in this
e-mail is strictly forbidden. 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050715/7dfc78de/attachment.htm